Overview
The Poison Spyder 14-16-020-DB is a BFH front bumper with a Brawler Bar and recovery shackle tabs, in bare 3/16″ plate steel. BFH means “Built For the Hammers”, and Poison Spyder designed the bumper around strength, simplicity and function.
The bumper is no wider than the Jeep’s frame rails, with angled facets that help it slide over rocks. It is cut from a single piece of high strength plate and brake-formed for an exact fit, with an integrated winch mount in a one-piece design. The Brawler Bar is a low-profile stinger that extends 7.4 inches forward and stands 9.8 inches high, and the shackle tabs are engineered to match the bumper’s angles.
Key features
- CNC laser-cut from a single piece of 3/16″ plate steel
- Integrated winch mount and one-piece design
- No wider than the frame rails, with angled facets
- Brawler Bar extends 7.4″ forward from the front edge and is 9.8″ high
- Recovery shackle tabs machined from 1″ thick plate steel for 3/4″ shackles
- Tabs match the bumper’s angles so approach angle is not reduced
Choosing a bumper for your build
A front bumper adds weight over the front axle and changes how the steering and suspension respond, so think about the rest of the front end before fitting one. Heavier steel bumpers can shift the balance on a vehicle that is already carrying a winch, a bull bar or large tires. Check that your front springs and shocks suit the added load.
Ground clearance and approach angle matter most on rocky trails, and a bumper with angled facets and tabs that match its geometry helps keep those angles intact. Plan the winch, fairlead and recovery straps together, and choose recovery points that are rated for the load you expect to pull. Inspect the mounting hardware after rough use.
- Confirm the winch and fairlead before mounting
- Plan for added front axle load
- Inspect mounting bolts after trail use
Specifications
| Brand | Poison Spyder |
|---|---|
| Part number | 14-16-020-DB |
| UPC | 614901725780 |
| Type | BFH front bumper with Brawler Bar and shackle tabs |
| Material | 3/16″ plate steel |
| Finish | Bare steel |
| Width | No wider than the frame rails |
| Winch mount | Integrated |
| Brawler Bar projection | 7.4″ forward, 9.8″ high |
| Shackle tab stock | 1″ thick plate steel |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. The bumper is designed around the Jeep’s frame rail width.
Confirm fit for your vehicle’s year, model and trim before ordering, and compare the frame rail width against the bumper’s dimensions.
Installation notes
The bumper comes as bare steel in this version and needs paint or powder coat. A winch fairlead is a separate part. The shackle tabs are matched to the bumper’s angles so approach angle is kept, which is why they are built into this bumper.
What’s included
- BFH front bumper with Brawler Bar
- Recovery shackle tabs
Not included: a winch, a fairlead and paint or powder coat.






































