Overview
The Poison Spyder Dana 30 Bombshell Differential Cover, part number 42-11-030, is a cast ductile nodular iron differential cover for the Dana 30 front axle, with extra oil capacity.
Poison Spyder says Bombshell covers protect gears, lockers and diff cover bolts from rocks and trail hazards. The design has recesses that protect the bolt heads, and a ramp profile that helps the vehicle slide over rocks. The cross-section is 7/16 inch to 1/2 inch thick, with up to 1 inch thick around the bolt ring.
Key features
- Cast from ductile nodular iron
- For the Dana 30 front axle
- Recesses protect the diff cover bolt heads from trail damage
- Ramp profile helps the vehicle slide up and over rocks
- Up to 1 inch thick around the bolt ring
- 7/16 inch to 1/2 inch thick over the rest of the cross-section
- Extra oil capacity
Protecting the front axle
A differential cover does more than seal the gears. It also takes the first hit from rocks and stumps, and a thicker cast cover keeps the gears and lockers protected when the trail gets rough. Covers like this one are often fitted when a builder wants extra oil volume for heavy use or longer intervals between changes.
Before installing, drain the old fluid, clean the mating surface and replace the gasket. A cover that is not seated evenly can leak, so snug the bolts in a cross pattern. Check the fluid level after the first few drives and look for seepage around the bolt ring.
- Clean the mating surface completely
- Use a new gasket and fresh bolts
- Check the fluid level after first drives
- Look for dents on the cover edge
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 42-11-030 |
| UPC | 614901733211 |
| Product type | Differential cover |
| Axle | Dana 30 (front, standard) |
| Material | Cast ductile nodular iron |
| Finish | Natural, bare steel |
| Thickness | 7/16 inch to 1/2 inch; up to 1 inch at the bolt ring |
| Oil capacity | Extra capacity |
| Fitment type | Universal fit for the Dana 30 front axle. |
Confirm the cover’s size against your axle housing before installing, if size matters for your build.
Vehicle fitment
The cover fits the Dana 30 front axle. Confirm that your vehicle has a Dana 30 front axle and check its year, model and trim before ordering.
Match part number 42-11-030 against your vehicle’s year, model, trim, engine and drivetrain so you receive the correct cover.
Installation notes
- Professional installation is recommended for axle, driveline and transfer case work.
- Torque every fastener to the correct value for your axle and use the fluids your vehicle needs.
- Re-check fasteners and look for leaks after the first miles of driving.
- Read all instructions before starting, and support the vehicle on jack stands rated for its weight rather than on a jack alone.
- Wear eye protection and gloves, and replace any worn, damaged or corroded fasteners.
What’s included
One differential cover. Check that you have bolts and a gasket on hand before starting the install.






























