Overview
The Poison Spyder Brawler Lite Front Midwidth Bumper with Brawler Bar and Tube Gussets, part number 17-63-010DBTP1, is a mid-width front bumper for the Jeep Wrangler (JK). It has a mid-width, high clearance design that combines off-road performance with a full feature set.
The bumper is fabricated from 3/16 inch plate steel, CNC laser-cut and precision brake-formed into a low profile shape. Its ends extend farther outboard than the Brawler Lite bumper, to about half the width of the tires, which gives more brush protection for the grille corners and fenders and a more expeditionary look than the more rock-crawling-specific Poison Spyder bumpers.
Key features
- Mid-width, high clearance design
- 3/16 inch plate steel, CNC laser-cut and brake-formed
- Ends protect the lower corner of the JK grille
- Integrated winch mount
- Shackle tabs
- Recessed buckets for mounting the factory fog lamps
- Black powder coat finish
- For 2 and 4-door models
Front bumper weight and mounts
A front bumper takes the first hit on rocks, brush and trail obstacles, so the mounting points carry more load than on a stock bumper. Steel construction adds weight at the front axle, which affects steering response and the load on the springs, particularly with larger tires or a lift.
Winch use puts strain on the bumper mounts and frame. Before adding a winch, confirm that the mounting plate, bolts and frame rails are sound, and use recovery straps and shackles rated for the load. Keep the winch line clear of the bumper edges during recovery.
Check the bumper and mounts after rough trail use. Look for loose bolts, cracked welds and paint chipping at stress points, and touch up bare steel to limit rust. Related parts often replaced with a bumper include the skid plate, D-ring mounts and the fog lamp wiring.
Specifications
| Brand | Poison Spyder |
|---|---|
| Part number | 17-63-010DBTP1 |
| UPC | 614901751598 |
| Part type | Front bumper, mid-width |
| Material | Steel |
| Plate thickness | 3/16 inch |
| Finish | Black powder coat |
| Width | Stubby (mid-width) |
| Winch mount | Included (integrated) |
| D-ring mounts | Included |
| Light mounts | Included |
| Body styles | 2 and 4-door models |
| Fit style | Direct fit |
Vehicle fitment
It is a direct fit for the Jeep Wrangler JK built from 2007 to 2018, covering two-door and four-door versions.
It is designed for the JK generation. Make sure your year, model and trim match before buying this bumper.
Installation notes
This bumper comes with a Brawler Bar and tube gussets, and the skid plate shown with it is sold separately.
What’s included
- Brawler Lite midwidth front bumper in black powder coat
- Brawler Bar and tube gussets, as named in the part title
- Integrated winch mount and shackle tabs
Not included: The skid plate shown with the bumper is sold separately.






















