Overview
The Poison Spyder 14-19-010-WG is a complete, fully welded roll cage with grab handles for the 1997-2006 Jeep Wrangler TJ. It replaces the factory cage with a bare steel unit that bolts into the Jeep, so owners who don’t have a welder, or don’t want to weld their own cage, get a finished welded assembly.
Poison Spyder starts from its Lazer-Fit Full Cage Kit, which is CNC laser notched and NC bent for fit, then welds the kit together in precision fabricated assembly fixtures. The TJ version uses Poison Spyder’s proprietary Lower A-Pillars, which give the forward section of the cage a solid base without intruding into the dash or cutting into legroom.
Key features
- Complete cage that replaces the factory roll cage
- Fully welded in precision fixtures, with grab handles
- Ready to bolt in, with no welding needed at installation
- Proprietary Lower A-Pillars designed for the TJ
- Structural DOM (drawn over mandrel) tubing, which Poison Spyder says has greater tensile and yield strength than HREW (hot rolled electric welded) tubing
- A-pillars, gussets and mounting plates CNC laser cut and precision brake-formed from 3/16 in plate steel
- Bare steel finish
Before you buy a roll cage
A roll cage carries load in a rollover, so its mounts and the body structure around them matter as much as the tubing. Look at how the cage ties into the body and whether the mounting points suit the floor and rear structure of your vehicle. Cages are often paired with harness mounts and seat belt anchors, which should be planned at the same time.
Once installed, inspect the welds, gussets and mounting plates regularly for cracks, especially after hard off-road use. Recheck bolts after the first few drives because new mounts can settle. A cage that rubs on the top, doors or seats should be adjusted before it is used on the trail.
- Plan harness and seat belt mounts early
- Recheck fasteners after initial drives
- Inspect welds after hard trail use
- Confirm soft top bows before installing
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 14-19-010-WG |
| UPC | 614901725919 |
| Tubing | 1.75 in x .120 DOM structural tubing |
| Plate steel | 3/16 in, for the A-pillars, gussets and mounting plates |
| Finish | Bare steel |
| Construction | Fully welded, with grab handles |
| Installation type | Bolt in, direct fit |
| Soft top required | Soft top with bow assembly; not compatible with bowless soft tops |
Vehicle fitment
This cage is designed for the Jeep Wrangler TJ, 1997-2006.
It is designed for the TJ and is not designed for the YJ, LJ or JK Wrangler generations. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The cage bolts into the Jeep and needs no welding at installation. It requires a soft top with a bow assembly and does not work with bowless soft tops.
What’s included
The fully welded roll cage with grab handles, including its Lower A-Pillars, gussets and mounting plates. Check the package contents against your installation before starting.














