Overview
The Poison Spyder Crusher Flare Inner Fenders (part 17-02-080) are bare aluminum front inner fenders for the 2007-2017 Jeep Wrangler JK, in 2-door and 4-door models. They replace the stock plastic front inner fender liners.
Poison Spyder describes them as an all-aluminum, CNC laser cut, precision brake-formed and bead-rolled replacement, built to look and fit with its Crusher Flares. The company says they can also go in with many other manufacturers’ aftermarket JK fender flares.
The installation is mostly bolt-on with minor drilling. Solid inner fender panels may be trimmed to fit coilover shocks, so the fit depends on your suspension setup.
Key features
- Single-piece aluminum construction
- CNC laser cut and precision brake-formed
- Bead-rolled for strength and looks
- Mostly bolt-on installation with minor drilling
- Solid panels may be trimmed for coilover shocks
- Works with many other aftermarket JK fender flares
Fender clearance and trimming
Inner fenders fill the space behind the wheel opening and protect the engine bay and wiring from mud and water. When tires are larger than stock, the liner area is where clearance is tightest, so check how the tire sits at full steering lock and at full suspension compression before drilling any holes.
Coilover shocks and upper control arms are the usual reasons solid panels need trimming. Mark the trim line with the wheel and suspension in place, cut a little at a time, and deburr the cut edges. Route any harness or brake line away from sharp edges and re-check clearance after the first off-road run.
- Test-fit before drilling
- Mark trim lines with suspension loaded
- Check brake lines and harnesses for rubbing
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 17-02-080 |
| UPC | 614901750737 |
| Product type | Front inner fender |
| Material | Aluminum |
| Finish | Bare aluminum |
| Models | 2-door and 4-door |
| Installation type | Cutting or drilling required (minor drilling) |
| Fitment type | Direct fit |
Vehicle fitment
They are for 2007-2017 Jeep Wrangler JK models, in 2-door and 4-door versions. Vehicles outside that range are not covered.
Vehicles outside the Wrangler JK, including the 2018 and later Wrangler JL, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation is mostly bolt-on with minor drilling. Test-fit the panels and check the coilover shocks before drilling, since solid panels may need trimming.
What’s included
Front inner fenders in bare aluminum. Check the package contents against your installation before starting.











