Overview
The 17-03-031 is a narrow width steel front crusher flare for the Jeep Wrangler JK in two-door and four-door models. It is 2 inches narrower than the standard width front flare and is sold as a pair. The narrower width adds 2 inches of clearance from canyon walls, trees and obstacles on tight trails.
The JK’s thin sheet metal fenders and stock plastic flares are vulnerable on the trail. This narrow crusher flare replaces them with steel and is designed to work with the inner brace system. The combination is built to withstand hard scrapes against granite canyon walls.
The outer tube is 1.5 inch x .120 wall DOM structural tubing, which Poison Spyder describes as a rub rail. DOM stands for drawn over mandrel. The mounting plate is 3/16-inch thick and CNC laser cut, and its mounting holes are countersunk for flat-head stainless steel hardware, which keeps the fasteners flush with the flare surface.
The flares ship as bare steel and must be painted or powder coated before final installation. Installation requires no cutting or drilling.
Key features
- Narrow width, 2 inches narrower than standard width front flares
- 1.5 inch x .120 wall DOM structural tubing rub rail
- CNC laser cut 3/16-inch mounting plate
- Mounting holes countersunk for flat-head stainless steel hardware
- Designed to work with Poison Spyder’s inner brace system
- Sold as a pair, bare steel
Paint prep and sealing
Narrow flares ship as bare steel, so the finish is the first real job. Remove mill scale and oil with a degreaser, scuff the surface, and apply a primer that bonds to steel before a topcoat or powder coat. Pay attention to the countersunk holes, which are easy to miss and can start rust if left bare.
Because no cutting or drilling is required, the flares can be coated and then bolted on with the stainless flat-head hardware. Keep the 1.5 inch rub rail and the mounting plate edge coated fully, since those surfaces take the most trail contact.
On tight trails the narrow width keeps the flare away from canyon walls and trees, but it can still scrape. Inspect the rub rail after rough runs and touch up any chips quickly. A small amount of attention each season keeps the finish sound.
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 17-03-031 |
| UPC | 614901742275 |
| Location | Front |
| Type | Fender |
| Width | Narrow, 2 inches narrower than standard width |
| Outer rub rail | 1.5 inch x .120 wall DOM structural tubing |
| Mounting plate | 3/16-inch thick, CNC laser cut |
| Quantity | Sold as a pair |
| Finish | Bare steel |
| Installation type | No cutting or drilling required |
| Fitment type | Direct fit |
Vehicle fitment
This narrow front flare is made for the Jeep Wrangler JK, which covers the 2007–2018 model years in two-door and four-door bodies.
It fits the Jeep Wrangler JK, 2007–2018 model years, in two-door and four-door bodies. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires no cutting or drilling. Finish the bare steel with paint or powder coat before the flares go on.
What’s included
A pair of narrow width steel front crusher flares with their 3/16-inch mounting plates and 1.5 inch x .120 wall DOM rub rails.
Not included: paint or powder coating for the bare steel.






















