Overview
The Poison Spyder 14-02-093 is a high-line front fender in bare steel, part of the DeFender XC line, which Poison Spyder designs for extreme tire clearance without a tall lift. The fender maintains a low center of gravity (LCOG) while raising the wheel opening for larger tires.
The fender is CNC laser cut and brake-formed from 3/16-inch plate steel, like the standard DeFender. The back of the wheel opening sits about 2 inches further back than typical tube fenders and about 4 inches further back than the stock Jeep flares. The XC wheel opening is 3 inches higher than the standard DeFender, which gives tire clearance with minimal lift. In most cases 37-inch tires clear with no suspension lift, and 40-inch tires need a couple of inches of lift.
This version has a 3-inch tapered flare that provides the same splash protection as the regular 3-inch flare, keeping mud and debris off the side of the Jeep. The flare edge tapers toward the front of the Jeep, parallel to the tapered hood edge, and reaches about the width of the Zero Flare at the front. That keeps clearance for articulating tires on tight trails. A mounting location for a 3/4-inch LED marker light is included.
The fender requires modification to the factory hood. Poison Spyder’s DeFender XC Inner Fenders, part PSC14-02-099, are also needed to complete the installation.
Key features
- High-line design with 3 inches of extra clearance in the wheel opening
- 3-inch tapered flare that matches the hood line
- CNC laser cut and brake-formed from 3/16-inch plate steel
- Wheel opening sits about 2 inches further back than typical tube fenders
- Mounting location for a 3/4-inch LED marker
- Bare steel finish
Clearance and suspension lift
High-line fenders raise the wheel opening so a larger tire has room to move without a tall lift. That keeps the center of gravity lower than a lifted setup would, but it also means the body and inner structure must be checked for clearance at full suspension travel before the fenders are trimmed or fitted.
Before cutting the factory hood, mark the layout, dry fit the fender and inner fenders, and confirm the hood closes without interference. Tires, steering lock and suspension travel all affect final clearance, so test each change in stages rather than trimming everything at once.
- Dry fit the fender and inner fenders before any cutting
- Check hood closure after each trim step
- Test steering lock and suspension travel with the tire fitted
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 14-02-093 |
| UPC | 614901724929 |
| Type | High-line front fender, DeFender XC |
| Material | 3/16-inch steel plate |
| Flare | 3-inch tapered |
| Marker mount | 3/4-inch LED marker |
| Finish | Bare steel |
| Installation type | Cutting or drilling required |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit. Confirm the application for your vehicle’s year, model and chassis code before ordering.
The fender requires the DeFender XC Inner Fenders and modification to the factory hood. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Each Jeep has specific considerations for the hood modification and inner fender fit, so check them for your model before installing.
What’s included
The kit includes the bare steel DeFender XC high-line front fender with its 3-inch tapered flare.
Not included: the DeFender XC Inner Fenders (PSC14-02-099), the hood modification and the 3/4-inch LED marker light.
















