Overview
The vented front inner fender kit from Poison Spyder fits the 2007 to 2017 Jeep Wrangler JK, including the Rubicon and Unlimited models, in two-door and four-door bodies. Each inner fender is a 4-piece bolt together assembly of CNC laser cut aluminum sheet, finished in black powder coat.
The vented design allows airflow through the engine bay and helps the engine run cooler, while the panels still provide splash protection for the engine compartment. It is a direct fit for the 2007 to 2017 Jeep Wrangler JK.
Key features
- Vented aluminum panels for airflow through the engine bay
- Splash protection for the engine compartment
- Four-piece bolt together assembly
- CNC laser cut aluminum with a black powder coat finish
- Written for 2 and 4-door Wrangler JK models
Keeping the engine bay clear
Inner fenders work as a shield between the wheel and the engine compartment. They block spray and debris that would otherwise reach hoses, wiring and the engine itself. Because this kit is vented, air moves through the engine bay, which carries heat away from the engine. Vents also let water and mud drain more easily after a crossing.
Vented panels still need regular checks. Look for debris packed behind the openings, because a blocked vent reduces airflow and holds moisture against the aluminum. When reinstalling a panel, check that the four pieces of each side line up before final tightening so the vents stay clear and the seams stay tight.
- Clear mud from vent openings after off-road use
- Check bolts after the first few trail runs
- Look for cracks around fastener holes
- Keep engine bay wiring clear of sharp edges
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| UPC | 614901757781 |
| Type | Front inner fender kit, vented |
| Material | Black powder coat aluminum |
| Construction | CNC laser cut, 4-piece bolt together |
| Vehicle | Jeep Wrangler JK, 2007 to 2017 (Rubicon and Unlimited) |
Vehicle fitment
The kit is written for the 2007 to 2017 Jeep Wrangler JK, in Rubicon and Unlimited models and in two-door and four-door bodies.
Other Wrangler generations are not covered by this kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The inner fenders are a bolt together assembly, so the four pieces of each side are fitted and fastened together. Check the fit of the pieces before final tightening.
What’s included
Vented front inner fender panels in black powder coat aluminum, as a 4-piece bolt together assembly for each side.












