Overview
The Poison Spyder Bruiser MID 17-55-010DBTP1 is a mid-width front bumper for the Jeep Wrangler JK (2007-2018), in both 2-door and 4-door versions. It is fabricated from 3/16″ plate steel and finished in semi-gloss black SpyderShell Armor Coat.
Its ends reach about halfway across the width of the tires, giving more protection to the grille and corners while keeping clearance for up to 37″ tires at full suspension articulation. A winch sits in a recessed cradle separate from the bumper shell, which lowers the winch’s weight and leaves the radiator airflow unobstructed at highway speeds. The fairlead mounts directly to the integrated fairlead mount on the bumper.
Key features
- Mid-width, multi-faceted design from 3/16″ plate steel
- Clearance for up to 37″ tires at full articulation
- Recessed winch mount for airflow and a lower center of gravity
- Integrated fairlead mount, so no separate fairlead mount is needed
- Brawler Bar from DOM tubing with tube gussets
- Recessed mounts for LED cube lights, compatible with most 2X2 cube lights
- Extreme duty shackle tabs machined from 1″ thick steel billet
- SpyderShell Armor Coat semi-gloss black finish
Winch and recovery setup
A front bumper carries the winch, so the mounting area and the bumper’s attachment points work together as one system. The recessed winch cradle keeps the weight of the winch low and separate from the bumper shell, which helps the vehicle keep its balance on uneven ground. Before mounting a winch, confirm the winch’s bolt pattern and the rated pull of the line you plan to run.
Recovery gear is only as good as the anchor point, so check the shackles, bolts and fairlead mount after each recovery. Recovery straps and shackles wear over time, and worn gear should be replaced rather than patched. Keep the winch wiring away from sharp edges and moving suspension parts.
- Confirm the winch bolt pattern before ordering
- Inspect the shackle pins and tabs after each recovery
- Route the winch cable so it stays clear of the bumper edges
Specifications
| Brand | Poison Spyder |
|---|---|
| Part number | 17-55-010DBTP1 |
| UPC | 614901766479 |
| Type | Bruiser MID front bumper |
| Material | 3/16″ plate steel |
| Finish | SpyderShell Armor Coat, semi-gloss black |
| Tire clearance | Up to 37″ tires at full articulation |
| Winch pattern | 10″ x 4.5″ |
| Winch mount | Recessed |
| Brawler Bar tubing | 1-3/4″ diameter, .120 wall DOM |
| Body styles | 2-door and 4-door |
| Shackle tab stock | 1″ thick steel billet, for 3/4″ shackles |
Vehicle fitment
The bumper fits 2007-2018 Jeep Wrangler JK models, in both 2-door and 4-door versions. It is made for the JK generation only and does not cover the TJ, LJ or JL. Confirm your vehicle’s year, model and trim before ordering.
It is made for the JK generation only and does not cover the TJ, LJ or JL. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The Bruiser works with most winches that use the 10″ x 4.5″ mounting pattern, including Warn ZEON series winches up to model 10S, and Poison Spyder ZEON Winch Spacers are not needed. The LED lamps are not included and must be bought separately. The optional JK Bruiser Front Skid hides the factory crash bar and protects the electronic sway bar disconnect.
What’s included
- Bruiser MID front bumper with Brawler Bar
- Recessed LED cube light mounts
- Extreme duty recovery shackle tabs
Not included: LED lamps, a winch, and the optional JK Bruiser Front Skid.









