Overview
The Poison Spyder 14-08-060 is a set of bare steel rocker knockers with tubular sliders, cut from 3/16 in high strength plate steel. Poison Spyder describes them as made for most Jeep CJ, YJ, TJ and LJ models.
The guard hugs the rocker panel closely, which Poison Spyder says keeps ground clearance loss to a minimum. The welded DOM slider keeps the body sides away from taller rocks and trees, and it can serve as a short entry step.
The guard follows the rocker panel closely, which keeps ground clearance loss to a minimum.
Key features
- Rocker panel guard formed from 3/16 in plate steel, CNC laser cut and brake formed
- Close fit to the rocker panel, with little loss of ground clearance
- DOM tubular slider welded with tube spacers
- Countersunk bolt holes for stainless steel flat head hardware
- Body mounted, with no gap when a body lift is installed
Rocker protection and liners
Rocker panels take hits from rocks and trail debris that the rest of the body does not face. A guard that closes the gap between the tire and the body gives the panel something to slide along, so the impact lands on the guard rather than the sheet metal below the door.
A tubular slider works best when it is set against a solid surface. Check the bolt holes and mounts after the first trail runs, and retighten any fasteners that have loosened under vibration. Stainless flat head hardware resists corrosion, but it still needs a torque check after installation.
Rubber liners sit between the guard and the body, protecting the paint and reducing rattles. Choose liners cut for your model and check that they do not bind on the mounts before final tightening.
- Look for cracks where the slider meets the guard
- Clean mud from the gap so you can spot movement
- Replace liners that have compressed or torn
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 14-08-060 |
| UPC | 614901725629 |
| Material | 3/16 in high strength plate steel |
| Slider | DOM structural tubing with DOM tube spacers |
| Fasteners | Stainless steel flat head, countersunk holes |
| Finish | Bare steel |
| Installation type | Cutting or drilling required |
Vehicle fitment
These guards are made for most Jeep CJ, YJ, TJ and LJ models. Check fit against your year, model and trim, and confirm the mounting points on your model before drilling.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires cutting or drilling. The guards bolt to the strengthened areas of the tub, such as body mounts and strengthening ribs, so mark the holes before drilling. Rubber rocker liners, precisely cut to fit between the guard and the body, can be added for paint protection and vibration absorption.
What’s included
Rocker knockers with tubular sliders, stainless steel flat head mounting hardware and detailed installation instructions.
Not included: Rubber rocker liners, which protect the paint under the guard and absorb vibration. They must be obtained separately.





















