Overview
The Poison Spyder 14-59-010-DB is a RockBrawler front bumper with a Brawler Bar and recovery shackle tabs, in bare 3/16 inch plate steel. It is a mid-width, high clearance bumper.
The bumper ends reach far enough to protect the lower corner of the grille but not so far that they hinder tire clearance or tire access to vertical obstacles. The faceted design is meant to give strong ground clearance and approach angle without frame modifications. Any winch with the standard 10″ X 4.5″ mounting pattern bolts on, although a winch fairlead mount is needed separately.
The Brawler Bar is a low-profile stinger meant to protect the winch, grille and radiator area. A complex laser-cut notch lets it be welded to two different planes on the surface of the bumper, and 3/16″ plate steel gussets reinforce it. The recovery shackle tabs are modeled on the high clearance tabs of Poison Spyder’s BFH series and are angled for approach angle; a pair is welded to this bumper.
Key features
- Mid-width, high clearance design from 3/16″ plate steel
- CNC laser-cut and precision brake-formed
- Brawler Bar stinger from 1-3/4″ diameter .120 wall DOM tubing with 3/16″ plate steel gussets
- Fits winches with the standard 10″ X 4.5″ mounting pattern
- Faceted design that does not require frame modifications
- Recovery shackle tabs CNC machined from 1″ thick steel billet for 3/4″ shackles
Winch and recovery setup
A front bumper with a stinger and shackle tabs changes how the vehicle is recovered, so the whole setup should be planned together. The winch, fairlead mount, shackles and recovery strap all need to match in strength. Keep the winch line straight from the drum to the fairlead, and avoid pulling at an angle that loads the tabs from the side.
Steel bumpers rust quickly when left bare, so finish the bumper before it sees trail use. After the bumper is mounted, check the bolts and welds around the stinger after hard recoveries, and look at the shackle tab pin holes for cracks or wear.
- Match shackles to the tab pin size
- Avoid side-loading shackles on the tabs
- Check welds and bolts after hard recoveries
- Paint or powder coat before trail use
Specifications
| Brand | Poison Spyder |
|---|---|
| Part number | 14-59-010-DB |
| UPC | 614901726169 |
| Type | RockBrawler front bumper with Brawler Bar |
| Material | 3/16″ plate steel |
| Finish | Bare steel |
| Width | Mid-width, high clearance |
| Brawler Bar tubing | 1-3/4″ diameter, .120 wall DOM |
| Winch pattern | 10″ X 4.5″ |
| Shackle tab stock | 1″ thick steel billet, for 3/4″ shackles |
| Light mounts | Not included |
Vehicle fitment
Check the bumper’s mounting points against your frame before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A winch fairlead mount is needed if a winch is fitted. The bumper is bare steel and needs paint or powder coat before final installation.
What’s included
- Front bumper with Brawler Bar
- Pair of recovery shackle tabs welded to the bumper
Not included: a winch, winch fairlead mount and paint or powder coat. Light mounts are not included.









