Overview
The Poison Spyder RockBrawler Rear Bumper with Shackle Tabs in bare steel, part number 14-61-010-D, is a plate steel rear bumper with a built-in high clearance hitch receiver. Its universal mounting system comes with captured hardware for the TJ/LJ, YJ and CJ.
Poison Spyder fabricates the bumper from 3/16″ plate steel that is CNC laser-cut and precision brake-formed into a low profile, high clearance design. A built-in step and recess provides access to the rear of the Jeep and clearance for the spare tire, and the bumper may be used with the stock spare tire carrier.
The shackle tabs are CNC machined from 1″ thick steel billet to accept 3/4″ recovery shackles, and this option gives you a pair welded to the bumper. The integrated hitch receiver is not rated for towing; it is intended as a recovery attachment point only.
Key features
- 3/16″ CNC laser-cut plate steel, bare
- Built-in high clearance hitch receiver (recovery point only)
- Built-in step and recess for rear cargo access
- Shackle tabs from 1″ thick steel billet for 3/4″ shackles
- Universal mounting system with captured hardware
- Works with the stock spare tire carrier
Rear recovery and access
A rear bumper on a Jeep does several jobs at once. It protects the tail lamps and rear body, gives a recovery point, and frames the rear cargo area when the step and recess are used. The mounting system determines whether the bumper sits square to the frame, so it is worth checking the bolt pattern before the bumper is set in place.
Recovery hardware should match the rated load of the job. Shackles, straps and any D-ring need to be rated above the expected pull, and the attachment point must be used in line with the pull direction. Inspect the shackle tabs and welds after each recovery, since a bent tab or cracked weld can fail under a sudden load.
- Keep recovery attachment points clear of the spare
- Check the mounting bolts after rough trail runs
- Keep a strap rated for the vehicle’s weight
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 14-61-010-D |
| UPC | 614901726183 |
| Part type | Rear bumper |
| Material | 3/16″ plate steel |
| Finish | Bare steel |
| Shackle tabs | Included, 1″ thick steel billet, for 3/4″ shackles |
| Receiver | Built-in, not rated for towing |
| Tire carrier | Not included |
| Mounting | Universal system for TJ/LJ, YJ and CJ |
Vehicle fitment
The universal mounting system fits the TJ/LJ, YJ and CJ. That covers the 1997-2006 Wrangler (TJ), the 2004-2006 Wrangler (LJ), the 1987-1995 Wrangler (YJ) and the CJ.
It is not made for the 2007-2018 Wrangler (JK), and the JK RockBrawler bumpers have their own part numbers. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
To fit your Jeep, pop out the mounting bolts that your application does not use and bolt the bumper on. The captured hardware is already in place.
What’s included
- RockBrawler rear bumper with welded shackle tabs
- Captured mounting hardware
Not included: a tire carrier or recovery shackles.









