Overview
The Poison Spyder Customs 3/4 inch LED marker and turn signal lamp, part 41-04-085, is an amber lamp that works as both a turn signal and a marker light. It is a three-wire assembly and is DOT-approved for use on a vehicle.
The lamp is designed for Poison Spyder Customs DeFenders, Tube Fenders and Crusher Flares, and it can mount on any flat panel where a 3/4 inch hole can be drilled. Poison Spyder includes a pigtail harness and mounting grommet with each lamp.
Key features
- Amber LED lamp
- Three-wire assembly for turn signal and marker use
- DOT-approved
- Pigtail harness and mounting grommet included
- Mounts through a 3/4 inch hole in a flat panel
Wiring and placement
Marker and turn signal lamps are most useful when they are easy to see from the front and rear. Choose a flat panel that gives a clear view, and keep the lamp away from spots where mud, water or rock strikes are likely to hit the lens and wiring.
The three wires should be routed through the pigtail harness and kept clear of moving parts and heat. Use a sealed splice or connector where the harness meets the vehicle’s lighting circuit, and test the turn signal and marker function before the panel is closed up.
Lens condition matters over time. Check the lamp after off-road use for cracks, moisture or loose grommets, and clean the lens so the amber light remains visible. Local rules on lamp placement and color apply to any change, so verify them before driving on public roads.
- Keep the lamp clear of mud and rock strikes
- Use sealed connectors where the harness meets the circuit
- Test the turn signal and marker function before closing the panel
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 41-04-085 |
| UPC | 614901728002 |
| Lamp type | LED, marker and turn signal |
| Color | Amber |
| Wires | 3 |
| Mounting hole | 3/4 in |
| Approval | DOT-approved |
| Sold | Each |
Vehicle fitment
This lamp is not vehicle-specific. It fits any flat panel that takes a 3/4 inch hole, including the Poison Spyder DeFenders, Tube Fenders and Crusher Flares. Check that the panel and its location suit a turn signal before drilling.
Installation notes
Drill a 3/4 inch hole in a flat panel, then fit the mounting grommet and lamp. The three wires run through the pigtail harness. Check local rules on lamp placement and color before road use, and wire the lamp so the turn signal and marker work as intended.
What’s included
One LED lamp, a pigtail harness and a mounting grommet.









