Overview
The Poison Spyder RockBrawler Rear Bumper with Tire Carrier and Shackle Tabs in bare steel, part number 14-61-020-D, combines a 3/16″ plate steel bumper, an adjustable swing-out spare tire carrier and a pair of welded shackle tabs. The universal mounting system comes with captured hardware for the TJ/LJ, YJ and CJ.
The tire carrier is built from bent DOM tubing and laser-cut plate steel. Its extreme duty hinge uses a CNC machined spindle and housing with a pair of Timken tapered roller bearings, a spring-loaded pin-lock with stainless steel slider plate keeps the carrier open while you reach the tailgate, and the tire mount adjusts up and down and in and out for tires up to 40″. A license plate mount placing the plate at the center of the spare is included.
The integrated receiver hitch is tucked high up into the bumper and is not rated for towing; it is a recovery attachment point only. The shackle tabs are CNC machined from 1″ thick steel billet for 3/4″ recovery shackles. The bumper can be mounted without cutting or altering the Jeep’s frame rails and comes with Grade 8 mounting hardware.
Key features
- 3/16″ CNC laser-cut plate steel bumper, bare
- Swing-out tire carrier for tires up to 40″
- Hinge with Timken tapered roller bearings
- Spring-loaded pin-lock with stainless steel slider plate
- Adjustable up and down and in and out
- License plate mount included
- Shackle tabs from 1″ thick steel billet for 3/4″ shackles
- Integrated receiver hitch, for recovery use only
Choosing a tire and wheel setup
A swing-out carrier adds weight and leverage at the rear of the vehicle, so the hinge, bearings and pin-lock carry more load than a standard spare mount. Before buying, measure the diameter and width of the tire you plan to carry, then check that the carrier clears the tailgate and the rear wheel when open. Backspacing and center hole size decide whether a wheel will sit correctly on the carrier hub, so measure those before ordering.
Bare steel needs paint or powder coat before the bumper sees trail use, and the coating should be finished before the tire is mounted. Check the hinge bearings and pin-lock every few months, and keep the slider plate clean and lightly lubricated. Look for loose hardware, cracks at welds or a spare that sags when open, and tighten or replace parts as soon as wear appears.
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 14-61-020-D |
| UPC | 614901726206 |
| Part type | Rear bumper with tire carrier |
| Material | 3/16″ plate steel, DOM tubing carrier |
| Finish | Bare steel |
| Tire carrier | Included, up to 40″ tires |
| Carrier bearings | Pair of Timken tapered roller bearings |
| Shackle tabs | Included, for 3/4″ shackles |
| Receiver | Integrated, not rated for towing |
| Mounting hardware | Grade 8 |
| License plate mount | Included |
Vehicle fitment
The universal mounting system covers TJ and LJ Wranglers from 1997–2006 and 2004–2006, YJ Wranglers from 1987–1995, and CJ models.
The carrier does not fit stock Jeep wheels or AEV wheels, and wheels with a center hole smaller than 2 inches or more than 4-1/2 inches of backspacing are not compatible. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Measure your wheel before choosing this bumper: the carrier does fit most aftermarket wheels, but not those with a center hole smaller than 2″ or more than 4-1/2″ of backspacing.
Remove the captured mounting bolts that your Jeep does not use. The bumper arrives as bare steel for you to paint or powder coat.
What’s included
- Rear bumper
- Swing-out tire carrier with license plate mount
- Pair of shackle tabs welded on
- Grade 8 mounting hardware
Not included: tires, wheels and recovery shackles.




































