Overview
The Poison Spyder Hood Louver in black powder coat, part number 14-53-010-PC, is a CNC laser-cut hood vent for Jeep vehicles that opens airflow out of the engine compartment. It is a direct fit louver, though no model years or chassis codes are named, so confirm the year and model of your hood before cutting. It is sold as a kit, with the fasteners, template and instructions in the same package.
Under-hood temperatures rise quickly when a Jeep is crawling at low speed, because the engine bay receives little moving air. Hot air rises and collects in the upper engine compartment, and this louver gives it a route out while pulling cooler air through the radiator. The result is better cooling for both the engine coolant and the air under the hood.
Key features
- Black powder coat finish
- CNC laser-cut and die-stamped construction
- Thick gauge aluminum sheet
- Light weight with good corrosion resistance
- Added rigidity against hood wobble
- One washer nozzle port
Engine bay heat and airflow
Heat in the engine bay builds most when a vehicle moves slowly, since the radiator receives less air and the engine stays under load. A hood vent gives rising hot air a route out, which can support the cooling system during crawling, idling and hot weather trail sessions. It works best as part of a system with a working fan and clear radiator fins.
Powder coated finishes resist chips better than bare metal in many cases, but chips still happen near hinges and edges, so touch-up paint is worth keeping on hand. Before drilling, mark the hood’s inner side, check for wiring and sensors, and confirm there is clearance around the washer lines. Cut slowly and deburr the edges before fitting the fasteners.
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 14-53-010-PC |
| UPC | 614901726091 |
| Finish | Black powder coat |
| Material | Aluminum sheet, thick gauge |
| Construction | CNC laser-cut and die-stamped |
| Washer nozzle ports | 1 |
| Fasteners | Stainless steel, supplied |
| Template | Full size, with instructions |
| Installation | Drilling and cutting of the hood required |
Vehicle fitment
No model years or chassis codes are named for this louver. Before cutting, compare the hood on your Jeep with the template, and confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The template is the guide for every cut, so line it up carefully before marking the hood. Stainless steel fasteners are supplied for the louver. Because the washer nozzle port is part of the design, confirm its position against your washer nozzle before drilling.
Hood louvers are fairly easy to install, but they do require some drilling and cutting of the hood, so plan the work before the first hole. Each hole is marked on the template before it is drilled, so the template is checked against the hood first.
What’s included
One black powder coated hood louver, stainless steel fasteners, a full-size template and instructions.


















