Overview
The Poison Spyder Trail Cage with Grab Handles, part number 18-18-015-G, is a bolt-together add-on roll cage kit for the 4-door Jeep Wrangler JK. It is made from 1.75″ DOM tubing with a .120 wall and 3/16″ plate steel, supplied in bare steel.
The Trail Cage strengthens the Jeep’s existing roll bar and fortifies the driver and passenger area. It uses CNC laser notched, NC-bent DOM (drawn over mandrel) steel tubing. Its A-pillar section is a single piece of CNC laser cut, brake-formed 3/16″ plate steel that runs to the floor. It hugs the dash ends so legroom and entry are not hindered, and it bolts to the floor, the forward door post and the dash structure. The cage works with all soft goods and factory and aftermarket tops, and grab handles are included.
Key features
- Bolt-in kit that strengthens the existing roll bar
- Made from 1.75″ DOM tubing with a .120 wall
- 3/16″ full height, one-piece A-pillar plate to the floor
- A-pillar bolts to the floor, forward door post and dash structure
- Forward door post connection uses a 1/2″ thick strengthening rib
- Heavy-duty gusseting on the lower A-pillar
- Works with all soft goods, factory and aftermarket tops
- Includes grab handles
Before you install the cage
A roll cage adds rigidity to the body, and its value depends on how well it is attached. The mounting points on the floor, door post and dash structure carry the load, so the connections need to be clean and tight. Check the floor and frame for rust or cracks before fitting the cage, since a cage cannot strengthen weak metal.
Bare steel protects nothing on its own, so plan a coating soon after the cage is fitted. Padding helps protect occupants in a fall and is worth adding wherever the cage sits close to the body. Re-check bolts after the first trips, and inspect the welds and gussets for cracks after rough trail use or any hard impact.
- Inspect floor and frame for rust before mounting
- Apply paint or coating soon after install
- Re-check bolts and gussets after rough use
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 18-18-015-G |
| UPC | 614901727708 |
| Product type | Roll cage (Trail Cage kit with grab handles) |
| Body style | 4-door models |
| Tubing | 1.75″ DOM, .120 wall |
| Plate steel | 3/16″ |
| Strengthening rib | 1/2″ thick |
| Finish | Bare steel |
| Installation | Bolt-in |
| Top compatibility | All soft goods, factory and aftermarket tops |
| Grab handles | Included |
| Fitment type | Direct fit |
Vehicle fitment
It is for the 4-door Jeep Wrangler JK, model years 2007–2018.
The 2-door Wrangler JK, and other Wrangler generations such as the TJ and JL, are not covered by this 4-door listing. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Support the vehicle on jack stands or a lift on level ground, never on a jack alone. Tighten all fasteners to the proper torque for each bolt before driving, and re-check fastener tightness after the first miles of driving.
A roll cage is a safety component, so professional installation is the safer route. Confirm every bolt and bracket is installed and tightened correctly.
Bare steel will rust if left unprotected, so plan to paint or coat the cage, and add padding where required.
Check your local regulations and any competition rules on roll cage equipment.
What’s included
A Trail Cage kit with grab handles. Check the package contents against your installation before starting.
Not included: paint or coating for the bare steel, and padding where your setup requires it.




















