Overview
The Poison Spyder Trail Corner in black (part number 14-06-010-PC) is a 3/16 inch steel corner guard that protects one of a Jeep’s most vulnerable areas from rock damage. It is laser cut and precision formed to fit around the body corner and the OEM flares. The corner is powder coated black.
The kit includes stainless steel button head hardware and detailed installation instructions. The gas filler, taillight and license plate holes are pre-cut, and the original license plate hardware and taillights can be re-used. The corner works with OEM taillights. Confirm fit for your Jeep’s year, model and trim before ordering.
Key features
- 3/16 inch laser-cut steel, precision formed around the corner and OEM flares
- Black powder coat finish
- Stainless steel button head hardware included
- Pre-cut holes for the gas filler, taillight and license plate
- Works with OEM taillights, which can be re-used
- Detailed installation instructions included
Before you cut or drill
Installing a body corner guard usually means cutting or drilling sheet steel that sits close to the fuel system, wiring and taillight assembly. Measure and mark the work carefully, and check the clearance behind the panel before making any cut. Cutting with a suitable tool and removing burrs first keeps the edges clean and the fit tight.
Bare cut edges are the most likely place for rust to start, so seal them with a good primer and paint as soon as the guard is fitted. Check the corner after the first few trail trips, because stone strikes can chip the finish and expose metal that needs touch-up.
- Mark and measure before cutting
- Deburr all cut and drilled edges
- Prime and paint exposed metal
- Recheck bolts after the first few trips
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 14-06-010-PC |
| UPC | 614901725520 |
| Type | Body corner guard (Trail Corner) |
| Corner type | Short |
| Material | 3/16 inch steel |
| Finish | Black powder coat |
| Hardware | Stainless steel button head |
| Installation type | Cutting or drilling required |
Vehicle fitment
Make sure the corner and taillight area on your Jeep match the part before buying. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires cutting or drilling. The gas filler, taillight and license plate holes are already cut, and the original taillights and license plate hardware can be re-used.
What’s included
The Trail Corner in black, stainless steel button head hardware and installation instructions.
