Rubicon Express
Showing 529–576 of 898 resultsSorted by popularity
-
-
-
-
-
Shackle Reversal Kits
Rubicon Express Shackle Reversal Kit – RE2800
- Rubicon Express RE2800 shackle reversal kit for the YJ front suspension
- Lets the front wheels move back and up as the suspension compresses
- Little drilling and no welding to install
- Black powder coat components; UPC 614901440454
SKU: R/ERE2800 -
Shock Absorbers
Rubicon Express RXT Twin-Tube Shock Absorber – RXT2610B
- Rubicon RXT twin tube shock, 26.5 inches extended, 15.5 inches collapsed
- 11-inch stroke, 1.625-inch piston and 11/16-inch chrome shaft
- Eyelet mounts at both ends, gas charged
- Direct fit style; check vehicle fit before ordering
SKU: R/ERXT2610B -
-
-
-
-
-
Lift Kits
Rubicon Express 2.5″ Super-Ride Lift Kit – JL7141
- 2.5 to 3 inch Super-Ride lift for 2018–2022 Jeep Wrangler JL four-door models
- Coil spring kit with 1.75 inch 4130 chromoly Super-Ride front lower arms
- Clears 35 inch tires on a loaded non-Rubicon model and 37 inch tires on a Rubicon
- Shocks not included; part number JL7141
SKU: R/EJL7141 -
Complete Suspension Systems and Lift Kits
Rubicon Express Support Braces for RE9900 – RE9905
- Rubicon Express support braces for the RE9900 and RE9905 brackets
- Built for XJ Cherokees for added front end support
- Ties the RE9900 brackets into the unibody frame rail at the transfer case mount
- Direct fit; UPC 614901442250
SKU: R/ERE9905 -
-
Leaf Spring Axle Shim
Rubicon Express Degree Shim 2.5 Inch Wide X 6 Degree Steel – RE1468
- Rubicon Express RE1468 6 degree steel shim for leaf springs
- Fits leaf springs that are 2.5 inches wide
- Designed to become part of the spring pack rather than float on the perch
- Can be installed at the front or rear to set pinion angles
- Center pins not included; sold in pairs
SKU: R/ERE1468 -
Leaf Spring Plate
Rubicon Express Spring Plate Universal 2.5 Inch Wide/ Single – RE2050
- Rubicon Express RE2050 U-bolt skid plate for 2.5-inch wide springs
- Works front or rear on axles up to 3.25 inches in diameter
- Built-in threaded mounts for shock mounts or sway bar end links
- Black powder coat; UPC 614901440027
SKU: R/ERE2050 -
Shock Mounts
Rubicon Express Shock Mount – RE9957
- Pair of front axle brackets, designed as a shock mount, for 2007–2017 Jeep Wrangler JK
- Laser cut from 1/4 and 3/16 inch cold rolled steel and CNC formed
- For front Dana 30 and Dana 44 axles, 2- and 4-door models
- Bare steel, welding required
SKU: R/ERE9957 -
-
-
-
-
-
-
Sway Bar Link - Non Disconnect
Rubicon Express Sway Bar End Links Rear ZJ W/Inst – RE11503
- Extended rear sway bar end links with installation hardware for 3.5 to 5 inches of lift
- Direct replacement for the stock rear end link
- Made for the Grand Cherokee ZJ, rear position
- Sold as a pair
SKU: R/ERE11503 -
-
Lift Kits
Rubicon Express 5.5 Plus Inch Spring-Over Conversion Lift Kit with Mono Tube Shocks – RE5015M
Lift KitsRubicon Express 5.5 Plus Inch Spring-Over Conversion Lift Kit with Mono Tube Shocks – RE5015M
- 5.5-inch spring-over conversion lift that keeps stock-height springs
- Spring perches, spring plates, brake lines and drop pitman arm included
- Mono tube shocks included, per the title
- Welding and steering modifications are part of the install
- Rubicon Express suggests RE1445 and RE1444 leaf springs for 7 inches of lift
SKU: R/ERE5015M -
-
-
-
Leaf Spring Perch
Rubicon Express Standard Spring Perch 2.5 Inch /Pair – RE1935
- Rubicon Express RE1935 standard leaf spring perch for 2.5 inch wide springs
- Sold as a pair, 1/4 inch steel with a 6 inch spring contact area
- Welding required; offset pads and multiple center pin holes
- Universal builder part; no vehicle is listed
SKU: R/ERE1935 -
-
Lift Kits
Rubicon Express 2.5 Inch Lift Kit with Mono-Tube Shocks – RE7133M
- 2.5-inch lift with front and rear coil spring spacers
- Mono-Tube shocks, per the title
- Levels the factory rake; 1-3/4 coil spacer in the rear
- Bump stops, extended sway bar links and brake line extensions
- Maximum tire size is 35 x 12.50.
SKU: R/ERE7133M -
-
Drive Shafts
Rubicon Express TJ Rubicon CV Front Drive Shaft – RE1895-255
- Rubicon Express RE1895-255 CV drive shaft, 25.5 inches long
- Direct, bolt-on design with 1330 and 1350 U-joints
- Designed for Jeep Unlimited Rubicon LJ builds with Rubicon Express LJ short arm suspension
- Requires a slip yoke eliminator; made for the NP241OR transfer case
SKU: R/ERE1895-255 -
Drive Shafts
Rubicon Express CVF Drive Shaft – RE1895-165
- CV drive shaft for Jeep Wrangler TJ, 16.5 in long
- Built for the NP241 transfer case with 1330 and 1350 u-joints
- Direct, bolt-on fit for Rubicon Express TJ short arm suspension
- Rear position; slip yoke eliminator required
- Part RE1895-165, UPC 614901439441
SKU: R/ERE1895-165 -
