Overview
The Rubicon Express 2.5 inch Super-Ride lift kit, part number JL7141, is a 2.5 to 3 inch suspension lift for the 2018–2026 Jeep Wrangler JL four-door. It uses coil springs with Super-Ride front lower arms.
The coil rates are tuned for bump compliance and load handling. The system provides height to clear 35 inch tires on a loaded non-Rubicon model and 37 inch tires on a Rubicon. The kit also includes extended sway bar end links and extended bump stops.
Key features
- 1.75 inch diameter 4130 chromoly Super-Ride front lower arms
- Coil spring rear lift method
- Extended sway bar end links
- Extended bump stops
- Lift height range of 2.5 to 3 inches
Shocks and alignment after lift
Changing suspension height alters the geometry the rest of the vehicle was built around. Shocks are not included with this kit, so choose units with a length and valving that suit the new ride height and the way you use the truck. Longer travel can cause the shock to bottom out sooner if the wrong length is chosen, so compare the new extended range against your planned lift.
A lift also changes driveline angles and steering geometry, so an alignment after the springs and arms are in place helps tire wear stay even. Check brake lines, sway bar links and the steering linkage for stretching or rubbing during the first drives. Recheck the bump stops after any tire size change, since they are the last line of control at full compression.
- Choose shocks for the new height
- Plan an alignment after installation
- Check brake lines and links for tension
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | JL7141 |
| UPC | 614901277777 |
| Lift height range | 2.5 to 3 in |
| Kit type | 2.5 in suspension lift kit |
| Suspension type | Super-Ride short arm |
| Front lower arms | 1.75 in diameter 4130 chromoly |
| Rear lift method | Coil springs |
| Front shocks | None |
| Rear shocks | None |
| Shocks included | No |
| Tire clearance | 35 in on a loaded non-Rubicon; 37 in on a Rubicon |
| Fitment | Direct fit |
Vehicle fitment
The kit is for four-door Jeep Wrangler JL models from 2018 to 2026.
The kit is made for four-door models. Confirm your vehicle’s year, model and trim before ordering, including body style.
Installation notes
A 2.5 to 3 inch lift changes driveline angles and alignment, so plan an alignment after the new springs and arms are installed. Shocks are not included, so choose shocks that suit this lift height.
What’s included
A coil spring lift kit with Super-Ride front lower arms, extended sway bar end links and extended bump stops.
Not included: shocks, and fixed lower control arms.






