Overview
The Rubicon Express RE1382 front hydraulic bump stops are a bolt-on kit for 2007 to 2018 Jeep Wrangler JK models, both two-door and four-door Unlimited. Rubicon Express designed them as a bolt-on version of its 2.0-inch hydraulic bump stops, which otherwise needed custom fabrication. They are made in the USA.
Hydraulic bump stops give a smoother transition at full compression than a factory rubber bump stop. The kit is designed to work with Rubicon Express extreme duty 4-link, 3-link and radius arm long arm kits.
Key features
- Bolt-on 2.0-inch hydraulic bump stops
- Smooth transition at full compression
- Adjustable ride height
- Adjustable secondary spring rate engagement
- Designed for Rubicon Express long arm kits
- Made in the USA
Bump stops and suspension travel
Bump stops limit how far the axle can compress, so their position and firmness affect ride quality and component stress at full compression. Hydraulic designs add resistance over the final part of travel, which reduces the abrupt stop that a rubber bump can cause. The stop should be set to match the ride height and the spring rate you choose.
Other parts are often replaced alongside bump stops, including shock absorbers sized for the new travel and the control arm bushings that take the load at full compression. Check the mounting bracket for cracks and confirm that the stop does not contact the axle or frame before the vehicle is driven on rough ground. Inspect the stops after hard use and look for leaking fluid or damaged seals.
- Check the mount welds or brackets for cracks
- Inspect the stop for leaks or damaged seals
- Look for contact marks on the axle or frame
- Recheck clearance after changing ride height
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1382 |
| UPC | 614901214833 |
| Position | Front |
| Type | Hydraulic bump stop |
| Size | 2.0 inch |
| Ride height | Adjustable |
| Made in | USA |
Vehicle fitment
It fits the 2007 to 2018 Jeep Wrangler JK, in both two-door and four-door Unlimited models.
It is made for the Wrangler JK only. Check your vehicle’s year, model and trim before ordering.
Installation notes
The kit is a bolt-on installation, so no custom fabrication is needed. Adjust the ride height and secondary spring rate engagement to the setup you want, and check alignment after the front end is set.
What’s included
The front 2.0-inch hydraulic bump stops for the bolt-on kit.



