Overview
The Rubicon Express RE1687 is a heavy-duty front track bar bushing kit made of polyurethane. It replaces worn bushings in Rubicon Express track bars RE1610 and RE1660, and the replacement bushings are designed to improve handling and performance.
The kit will not work with a stock track bar, so it is intended only for the two Rubicon Express bars named above.
Key features
- Heavy-duty polyurethane bushings
- Replaces worn bushings in the front track bar
- Made for Rubicon Express track bars RE1610 and RE1660
- Not compatible with a stock track bar
Track bar wear and replacement
A track bar keeps the axle centered under the body, so worn bushings show up as steering slop or a wandering feel. Play can increase over time as the bushing material compresses or splits. Before replacing bushings, check the bar ends, the frame mounts and nearby joints for play, since a worn part elsewhere can mimic bushing wear.
Polyurethane bushings are firmer than factory rubber, which can transmit more road feel but also more noise on rough roads. When pressing new bushings into a bar, keep the parts square and use a lubricant made for the purpose. Recheck the track bar bolts after the first few drives and after any suspension work.
- Check bar ends and frame mounts for play
- Use a lubricant made for bushing installation
- Recheck track bar bolts after the first few drives
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1687 |
| UPC | 614901438918 |
| Type | Front track bar bushing kit |
| Material | Polyurethane |
| Compatible track bars | RE1610 and RE1660 |
| Fitment |
Vehicle fitment
The kit is designed for the RE1610 and RE1660 track bars, so the bar you have matters more than the vehicle. Confirm which Rubicon Express track bar you have before ordering.
Confirm which Rubicon Express track bar you have before ordering.
Installation notes
Do not press these bushings into a stock track bar. The kit is made only for the RE1610 and RE1660.
What’s included
Check the package contents against your track bar before starting, since the kit is made for the RE1610 and RE1660 only.
Not included: a track bar. The bushings replace the worn bushings in an existing Rubicon Express track bar.





