Overview
The Rubicon Express RE9957 is a pair of laser cut front axle brackets designed as a shock mount for 2007–2017 Jeep Wrangler JK models.
The brackets are needed to mount a custom Dana 30 or Dana 44 axle in a JK cleanly, or to strengthen an existing axle over stock brackets. They are laser cut from 1/4 and 3/16 inch cold rolled steel and then CNC formed.
The brackets are bare steel and need welding before use. They fit both 2- and 4-door models.
Key features
- Laser cut from 1/4 and 3/16 inch cold rolled steel
- CNC formed
- Bare steel, for welding in place
- Comes as a pair
- For front Dana 30 and Dana 44 axles
- Fits 2- and 4-door models
Fabrication and weld prep
Because these brackets arrive as bare steel, the fit and the weld are the whole job. Mark the mounting points on the axle first, then dry fit the brackets to check alignment with the frame and the new shock angle. Small shifts in the bracket position change how the shock and track bar work, so it is worth measuring twice before any tacking begins.
Clean the mating surfaces to bare metal and remove any paint, rust or grease that could cause porosity in the weld. Work in short passes and let the metal cool between them to limit distortion. Once the brackets are installed, inspect the welds for cracks and undercut, and recheck the axle alignment before driving the truck on public roads.
- Dry fit before any welding
- Clean all mating surfaces
- Inspect welds and alignment after fitting
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE9957 |
| UPC | 614901219418 |
| Material | Cold rolled steel, 1/4 and 3/16 inch |
| Forming | Laser cut and CNC formed |
| Finish | Bare steel |
| Axle use | Front Dana 30 and Dana 44 in a Jeep Wrangler JK |
| Doors | 2- and 4-door models |
| Installation | Welding required |
| Quantity per package | 2 (pair) |
Vehicle fitment
These brackets are for 2007–2017 Jeep Wrangler JK models in 2-door and 4-door form, used with front Dana 30 and Dana 44 axles.
Confirm your vehicle’s year, model and trim before ordering, since the brackets are made for 2007–2017 Wrangler JK models.
The JK generation ends after 2018, so 2018 and later Wrangler JL and Gladiator models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
These brackets require welding, so they are a fabrication job rather than a bolt-on install.
Welding steel near axle components calls for experience and proper preparation, so have a qualified fabricator handle it.
What’s included
A pair of RE9957 axle brackets.
Not included: the axle itself and the welding work.






