Overview
The Rubicon Express RE1466 is a pair of 4-degree aluminum axle shims for leaf springs that are 2.5 inches wide. Rubicon Express says they can be used at the front or the rear to set pinion angle. The center pins are not included.
The shim is designed to be universal, with the 2.5-inch spring width as its sole sizing reference.
Key features
- 4-degree pinion angle shim
- Aluminum construction
- Fits 2.5-inch wide springs
- Usable at the front or rear
- Designed as a universal shim, sized by 2.5-inch spring width.
Before you buy
A larger pinion angle correction puts more load on the driveline joints and the spring seat, so the change should be verified rather than assumed. Start by checking the existing angle, then compare it with the amount the shim adds. Shims are most often fitted when a lift has moved the axle out of its original geometry, so the lift height and spring condition matter as much as the shim itself.
Before installing, inspect the spring pack, pins and U-bolts for wear or cracks. Replace worn parts while the axle is out so the new angle is held securely. Recheck the angle and the driveline after the first trail outing, because seating can change as the shim settles.
- Confirm spring width before ordering
- Check the existing pinion angle first
- Recheck the angle after the first outing
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1466 |
| UPC | 614901438376 |
| Angle | 4 degrees |
| Material | Aluminum |
| Spring width | 2.5 inches |
| Center pins | Not included |
| Sold as | A pair |
Vehicle fitment
It is a universal design sized for 2.5-inch springs. Measure the spring width on your vehicle before ordering.
Installation notes
Center pins are needed for the seat and are not supplied, so source them separately. Check the pinion angle after installation to confirm the 4-degree change.
What’s included
A pair of 4-degree aluminum shims.
Not included: center pins.









