Overview
The Rubicon Express RE9905 is a set of support braces for the RE9900 brackets on the Jeep Cherokee (XJ), 1984 to 2001. They add support to the front end and reduce wear from prolonged use.
The braces tie and triangulate the RE9900 brackets back into the unibody frame rail at the transfer case mount. They are a direct fit for XJ Cherokees.
Key features
- Support braces for RE9900 brackets
- Triangulates the brackets back into the unibody frame rail
- Ties in at the transfer case mount
- Strengthens the front end to reduce wear
Front end upkeep
Support braces change how loads travel through a bracket. Rather than letting the mount take force alone, the brace carries part of it back into the frame rail. That makes the bolt joints and the frame metal around them the main points to watch. Inspect where the braces meet the brackets and frame, looking for cracked welds, elongated holes and rust at the mount.
Front end parts on an older Cherokee often share mounts and hardware with the suspension, so check nearby bushings and bolts at the same time. Retighten fasteners after the first few trail runs, and replace any bolt that shows stretching or thread damage.
- Check welds and mounting holes for cracks
- Look for rust at the transfer case mount
- Retighten fasteners after early use
- Inspect nearby bushings and bolts together
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE9905 |
| UPC | 614901442250 |
| Compatible brackets | RE9900 |
| Mounting point | Transfer case mount on the frame rail |
| Fitment | Direct fit |
Vehicle fitment
The braces are made for the Jeep Cherokee (XJ) from 1984 to 2001 and are built for the RE9900 bracket setup. They are not a general fit for other Cherokee generations.
Confirm your vehicle’s year, model and trim before ordering, and check the RE9900 brackets are already on or ordered for your build.
