Overview
The Rubicon Express RE4100 is an extreme-duty long arm conversion crossmember (pan) for the 1997-2002 Jeep Wrangler TJ. It is box 1 of a 2 box kit, and RE4102 is also required to complete it.
The RE4100 is a long arm conversion pan for the RE7200 series lift kits. It serves as the new mounting point for the control arms, the transmission and the transfer case, and its brackets strengthen the frame.
The drop out center section allows transfer case and transmission service without removing suspension components. The pan raises ground clearance by nearly an inch. Mounting it requires modifying the exhaust hanger bracket on some vehicles.
Key features
- Long arm conversion crossmember (pan) for the TJ Wrangler, 97-02
- Part 1 of a 2 box kit; RE4102 is also required
- Mounting point for the control arms, transmission and transfer case
- Brackets designed to strengthen the frame
- Drop out center section for transmission and transfer case service
- Black powder coat finish
Planning a long arm conversion
A long arm conversion moves the control arm mounts to a new crossmember, which changes the geometry of the front suspension. The pan carries the arms and drivetrain, so it takes the loads from braking and articulation. Before starting, plan how the transmission and transfer case will be supported during removal, since the drop out section is intended for service.
Because the drivetrain shifts, check driveline angles, brake line length and steering clearance after installation. Look at the exhaust, fuel lines and wiring near the pan. Inspect the frame around the brackets for cracks or weld damage before fitting, and re-torque all fasteners after the first road test.
- Check driveline angles after installation
- Inspect brake lines for stretch or rubbing
- Re-torque fasteners after the first road test
Specifications
| Brand | Rubicon Express |
|---|---|
| UPC | 614901441253 |
| Part type | Long arm conversion crossmember (pan), extreme duty |
| Finish | Black powder coat |
| Kit status | Box 1 of 2; RE4102 completes the kit |
| Intended use | With Rubicon Express long arm control arms; RE7200 series lift kits |
| Fit type | Direct fit |
| Fitment | TJ Wrangler 97-02 |
Vehicle fitment
No vehicle fitment list exists for the RE4100, so this fitment is based on the product title and description, which state TJ 97-02: the 1997-2002 Jeep Wrangler TJ.
Confirm fit for any Jeep outside the 1997-2002 TJ before ordering, including the 2003-2006 TJ and LJ.
Installation notes
Suspension, brake, steering and axle parts affect how the vehicle drives and stops, so professional installation is recommended.
Torque all fasteners to the correct specification for your vehicle, and support the vehicle on jack stands.
Re-check fasteners after the first miles of driving, have the alignment checked after any suspension work, and confirm that brake lines, hoses and driveshafts have enough clearance.
Check local regulations on vehicle height and lift before changing the ride height.
What’s included
One long arm conversion crossmember (box 1 of 2).
Not included: Box 2 (RE4102) is required to complete the kit. Long arm control arms are used with this crossmember and are not part of this item.











