Rubicon Express
Showing 481–528 of 898 resultsSorted by popularity
-
-
-
-
Flex Joints
Rubicon Express Super Flex Joint – RE3791-1
- Rubicon Express RE3791-1 small Super-Flex joint, a cartridge for upper control arms
- Built for factory upper control arm mounts on XJ, MJ, ZJ, TJ and WJ Jeep chassis
- UHMW side races and a threaded adjuster nut for tightening and rebuilding
- 1/2 in. ID ball, serviceable design
- Brand Rubicon Express, part number RE3791-1, UPC 614901440935
SKU: R/ERE3791-1 -
-
-
-
-
-
-
-
-
Flex Joints
Rubicon Express Super-Flex Coupler Assembly with 1 Inch Extension – RE3769
- Rubicon Express RE3769 super flex coupler assembly with a 1 inch extension
- Welded and powder coated Rubicon Grey, fully assembled
- 1.25 inch threaded coupler used in Rubicon lower control arms
- Right thread direction and serviceable joint
SKU: R/ERE3769 -
-
-
-
Shock Absorbers
Rubicon Express Monotube Front Shock Absorber with Remote Reservoir – RXJ715R
- Rubicon Express monotube front shock with remote reservoir, part number RXJ715R
- For 2 and 4 door models with a 4.5 to 5.5 inch lift
- Extended length 29.5 inches, collapsed 17.9 inches, travel 11.6 inches
SKU: R/ERXJ715R -
Shock Absorbers
Rubicon Express Monotube Rear Shock Absorber with Remote Resevoir – RXJ716R
- Rubicon Express RXJ716R rear monotube shock with remote reservoir
- Designed for a 4.5 to 5.5 inch lift on 2- and 4-door models
- Extended length 29.5 inches, collapsed length 17.9 inches
- Travel of 11.6 inches
SKU: R/ERXJ716R -
Leaf Spring Center Pin
Rubicon Express Leaf Spring Center Pins 5/16 Inch /Pair – RE1482
- Rubicon Express RE1482 leaf spring center pins, 5/16 inch, sold as a pair
- Pairs come with nuts for leaf spring applications
- Pins are longer than needed and are cut down after installation
- Universal design for leaf spring applications
SKU: R/ERE1482 -
Lift Kits
Rubicon Express 2.5 Inch Spacer Lift Kit – No Shocks – RE7133
- Built for the 2007–2018 Jeep Wrangler JK
- 2.5-inch lift from front coil spring spacers, with a smaller rear spacer
- Bump stops, extended sway bar links and brake line extensions included
- Maximum tire size of 35×12.50
- Shocks are not included; shock extensions allow factory shocks to stay in use
SKU: R/ERE7133 -
Long Arm Upgrade
Rubicon Express Tri-Link Pivot Ball Assembly – RE4455
- Tri-link pivot ball assembly for a rear three-link suspension kit
- Extra thick threaded insert for adjustment and rebuilding
- UHMW races and a precision machined end ring
- Part number RE4455 from Rubicon Express, silver powder coat
SKU: R/ERE4455 -
-
Transfer Case Slip Yoke Eliminator Kits and Hardware
Rubicon Express Slip Yoke Eliminator Kit – RE1801
Transfer Case Slip Yoke Eliminator Kits and HardwareRubicon Express Slip Yoke Eliminator Kit – RE1801
- Fixed yoke conversion for NP231 and NP242 transfer cases
- Drive flange machined from solid stainless steel
- Drill and tap included
- Recommended for lifts over 3.5 inches
- Requires modifying the factory output shaft
SKU: R/ERE1801 -
-
-
-
-
-
Lift Kits
Rubicon Express 2.5 Inch Lift Kit with Twin-Tube Shocks – RE7133T
- 2.5-inch economy spacer lift with coil spring spacers and bump stops
- Precision-valved twin tube shocks, per the title
- Front and rear coil spacers level the factory rake
- Extended sway bar links and brake line extensions
- Maximum tire size is 35 x 12.50 for the Jeep JK.
SKU: R/ERE7133T -
-
-
Universal Bushing
Rubicon Express Super-Ride PTMEG Retrofit Kit Small (Black) – RE3762
- Small PTMEG bushing retrofit kit in black, part number RE3762
- Converts factory-style bushings to steel-sleeved PTMEG Super-Ride bushings
- Includes bushing, conversion sleeve and inner sleeve
- Retrofits all Rubicon Express arms
SKU: R/ERE3762 -
-
-
-
