Overview
The Rubicon Express RM10242 is a narrow high-misalignment spacer with a 9/16-inch bore. It is CNC machined and zinc plated for corrosion resistance, and it allows a greater operating angle from heim joints.
The spacer is sold individually and is a universal fit part with a 9/16-inch bore. Check the bore against the heim joint you plan to use before ordering.
Key features
- High-misalignment design
- Narrow spacer profile
- 9/16-inch bore
- CNC machined
- Zinc plated for corrosion resistance
- Sold individually
Heim joint setup tips
A high-misalignment spacer works with the heim joint to add articulation, so its bore has to match the joint’s shank or hardware. A narrow profile helps when clearance is tight, but it does not replace a proper joint size check. Measure the joint and the bolt before ordering, and make sure the spacer seats flat against the housing.
In a steering or suspension link, extra operating angle can change how the joint loads under full articulation. Check the rod ends and surrounding brackets for contact at full travel, and re-torque hardware after the first trail sessions. Zinc plating protects the surface, but scratches should be touched up to limit corrosion over time.
- Verify the bore against the joint before buying
- Check for binding at full steering lock
- Inspect for wear after rough trail use
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RM10242 |
| UPC | 614901444810 |
| Width | Narrow |
| Bore | 9/16 inches |
| Machining | CNC machined |
| Finish | Zinc plated |
| Sold as | Individually |
| Fitment | Universal fit |
Vehicle fitment
The spacer is universal fit and no vehicle is named. Its usefulness depends on the bore matching the heim joint in your steering or suspension.
Confirm the bore and the joint size on your build before ordering.






