Overview
The Rubicon Express 22 inch rear brake line is a 22-inch line for the rear brakes. It has a stainless steel outer casing, a kevlar casing and a Teflon inner hose. It is intended for lifted applications from 4 to 6 inches.
Mounting brackets are supplied where they are needed, and the line is built to DOT specifications.
Key features
- 22-inch rear line
- Stainless steel outer casing
- Kevlar casing with Teflon inner hose
- Lifted range 4 to 6 inches
- Mounting brackets where needed
Rear line length and travel
Rear brake lines follow the axle as it moves through its travel. On a leaf-sprung or long-arm rear, the line bends and stretches with each compression and droop cycle, so its length sets how much slack is available at full extension. A line that is too short can pull at the fittings, while one that is too long can sag and catch on crossmembers or tires.
A longer line is often used when a lift or a different axle position increases the distance between the frame and the wheel, but the slack has to be balanced. Check the routing at both ends and where the line passes through brackets. Pair the line with fresh brake fluid and inspect the fittings for leaks after the first few drives.
- Measure the line route with the suspension at full droop
- Use the clips and brackets supplied for that route
- Look for chafing at contact points after each trail session
Specifications
| Brand | Rubicon Express |
|---|---|
| UPC | 614901451221 |
| Length | 22 inches |
| Position | Rear |
| Lift range | 4 to 6 inches |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Check your lift height against the 4 to 6 inch range before choosing it.
Installation notes
Check the length against your rear suspension travel, and make sure the line is clear of the tires. Bleed the brakes once the line is fitted.
What’s included
One 22-inch rear brake line and any brackets needed.

