Overview
The Rubicon Express RE1230 is a U-bolt kit with four U-bolts and nuts. It is sized for axle tubes with a 3.25-inch diameter.
The U-bolts are 1/2-inch rod with a 3.25-inch inside diameter and a 9-inch length. The axle tube diameter is what the kit is sized to, so measure it before fitting.
Installing U-bolts on a solid axle
U-bolts clamp the spring pack to the axle, so the clamp force depends on even tightening. Start every nut by hand, then tighten them in a criss-cross pattern so the spring seat stays square under the axle tube. Uneven tightening can twist the pack and cause the U-bolts to load unevenly. Keep the spring pack centered on the axle before final tightening, since a shifted pack changes the clamp load.
Check that the U-bolt bends clear the axle tube and spring pack without rubbing. Look at the threads and nuts before installation, and replace any that are rounded or damaged. Expect some settling after the first drives, so recheck nut tightness after a short run and again after any hard off-road use.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1230 |
| UPC | 614901437645 |
| Size | 3.25 inches by 8 inches |
| Included | 4 U-bolts and nuts |
| Axle tube diameter | 3.25 inches |
| Rod diameter | 1/2 inch |
| Inside diameter | 3.25 inches |
| Length | 9 inches |
| Fitment | Universal fit |
Vehicle fitment
No vehicle is named. The title refers to the Ford 8.8 axle, which is an axle name, so confirm the axle tube size on your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering, and measure the axle tube diameter.





