Select your vehicle
-13%

Rubicon Express Chromoly Draglink – RE2605

Rubicon Express

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rubicon Express RE2605 chromoly drag link with new rod ends
  • Complete kit for installation
  • Replaces the factory drag link
  • Alignment required after installation; UPC 614901440263

Description

Overview

The Rubicon Express RE2605 is a chromoly drag link that replaces the factory drag link. It comes complete with new rod ends and everything needed for installation.

The chromoly link is built to be stronger than the factory link and includes more parts than most factory replacements. Match the link to your steering geometry before ordering.

Key features

  • Chromoly drag link
  • New rod ends included
  • Complete for installation
  • Replaces the factory drag link

Steering geometry basics

A drag link carries steering motion from the steering box or gear to the opposite wheel. It works with the track bar and tie rod ends to keep both front wheels turning together, so wear in any one of these parts shows up as looseness or wander at the wheel. When a drag link is replaced, the joints at each end are the points most likely to be checked closely, because they take the steering load every time the wheel turns.

Before fitting a new link, inspect the tie rod ends, pitman arm and idler arm for play, since a worn joint left in place can affect alignment and the new part’s wear life. Keep the rod ends clean and free of grit, and check the jam nuts and clamp bolts after the first few trail runs. Expect the wheels to need alignment once the link is changed.

  • Check tie rod ends and idler arm for play before installation
  • Recheck clamp and jam nut tightness after the first trail runs

Specifications

Brand Rubicon Express
Part number RE2605
UPC 614901440263
Material Chromoly
Included New rod ends and everything needed for installation
Fitment Direct fit

Vehicle fitment

Verify the model and drag link position on your vehicle before buying.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Alignment is required after installation, so schedule it once the new drag link is in place.

SKU: R/ERE2605 Category:

Specification

Shipping weight 8.30 lbs
Package dimensions 36.50 × 4.30 × 4.30 in
brands

Questions & Answers

Are rod ends included with the RE2605?

Yes. The drag link comes complete with new rod ends and everything needed for installation. Check your steering geometry before ordering.

Does the RE2605 need an alignment?

Yes. Alignment is required after installation, so plan for an alignment shop visit once the new chromoly drag link is fitted. Schedule it as soon as the link is in place to keep steering geometry correct.

Which vehicle does the RE2605 fit?

Fit depends on the make, model and factory drag link position, so verify those on your truck first. The RE2605 replaces the factory drag link, so match it to the part you are removing.

How can I tell the drag link is worn?

Look for loose or sloppy steering, wandering on the road, and play at the joints when the wheels are rocked by hand. Replace it when the joints feel loose or the steering stays off-center after alignment.

Should other steering parts be replaced at the same time?

Often, yes. Worn tie rod ends or an idler arm can affect the new link's alignment and steering feel, so inspect them during installation. Replace any joint that shows play before the wheels are aligned.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon