Overview
The Rubicon Express RXT Twin-Tube Shock Absorber, part number RXT2610B, is a gas charged twin tube shock with a 26.5-inch extended length, a 15.5-inch collapsed length and an 11-inch stroke. It has eyelet mounts at both ends.
It has a 1.625-inch piston for control and an 11/16-inch chrome shaft for strength. The oversized body holds more fluid, and double welded rings add durability for on and off road use.
Key features
- 1.625-inch piston
- 11/16-inch chrome shaft
- Oversized shock body with added fluid capacity
- Double welded rings
- Eyelet mounts at both ends
Choosing a replacement shock
A twin tube shock controls how quickly the suspension compresses and rebounds, so it shapes ride comfort, body control and tire contact on rough roads. On the trail, a shock that keeps the tire planted helps the vehicle hold traction over ledges and ruts. On pavement, the same damping keeps the body from wallowing through corners and under braking. Because each shock works with its spring and the rest of the suspension, replacing one shock at a time can leave the two sides feeling uneven.
When choosing a replacement, start with the mounted length and stroke of the old shock, since the new unit must fit the available space at both ends. Gas charged designs help keep damping consistent when the oil heats up during long descents. Shocks are often replaced in pairs on the same axle so the damping matches side to side.
- Measure the old shock eye to eye before ordering
- Replace in pairs on the same axle
- Check bushings and mounting hardware for wear
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RXT2610B |
| UPC | 614901453669 |
| Series | RXT twin tube |
| Extended length | 26.5 inches |
| Collapsed length | 15.5 inches |
| Stroke | 11 inches |
| Piston | 1.625 inches |
| Shaft | 11/16-inch chrome |
| Mounts | Eyelet at both ends |
| Gas charged | Yes |
| Fitment type | Direct fit |
Vehicle fitment
No vehicle, year or chassis code is named for this shock, so confirm fit for your vehicle’s year, model and trim before ordering.
Match the 26.5-inch extended and 15.5-inch collapsed lengths to the measurements of the shock being replaced.




