Overview
The Rubicon Express rear track bar bushing kit, part number RE1686, replaces worn rubber bushings with polyurethane half bushings and a metal sleeve. It is designed for Rubicon Express RE1620 and RE1650 track bars.
Polyurethane bushings are designed to improve handling and performance compared with worn factory rubber bushings. The kit does not work with the stock track bar.
Key features
- Polyurethane construction in place of rubber
- Two half bushings and one metal sleeve
- Designed for Rubicon Express RE1620 and RE1650 track bars
Signs the bushings need replacing
Worn rubber track bar bushings often show up as clunking over bumps, looseness in steering, or uneven tire wear. Polyurethane replacements firm up that connection, but they work best when the rest of the rear suspension is sound. Check the track bar ends, frame mount and axle bracket for play before installing the kit, because a worn bracket will keep the new bushings from doing their job.
Polyurethane is less forgiving of misalignment, so tighten the fasteners to the specified torque and keep the bushing sleeves square. After installation, an alignment check helps confirm that the axle is centered and steering stays predictable. Recheck the hardware after the first few drives as the new bushings settle.
- Clunking or knocking over bumps
- Rear axle moving side to side under load
- Uneven tire wear after alignment
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1686 |
| UPC | 614901438901 |
| Material | Polyurethane |
| Contents | Two half bushings and one metal sleeve |
| Compatible track bars | RE1620 and RE1650 |
| Stock track bar | Not compatible |
Vehicle fitment
The kit is made for Rubicon Express RE1620 and RE1650 track bars, so the track bar you are using determines compatibility. Confirm fit before ordering.
Installation notes
Use this kit only with Rubicon Express RE1620 or RE1650 track bars, because it will not work with the stock track bar. Have the alignment checked after the bushings are replaced.
What’s included
Two half bushings and one metal sleeve.








