Overview
The Rubicon Express RE1609 is a rear lower track bar bracket for raised vehicles. Rubicon Express recommends it for resetting axle location and geometry after a lift.
It is for 2- and 4-door models that use 4-link long arm lift kits.
Track bar geometry after a lift
A lift changes the angle of the track bar and the position of the axle, which can shift the axle sideways under load. A lower track bar bracket helps set the lower mounting point so the bar runs closer to level and the axle stays centered. Getting that geometry right matters for steering feel and for keeping tires from rubbing on the body.
After installing a bracket, check the track bar’s length and angle at ride height, and verify that the axle stays centered over the chassis. Inspect the bushings and bolts after the first few drives, since new angles put load on them in new places.
- Measure the track bar angle at ride height
- Check axle centering after the lift is installed
- Inspect bushings and bolts after the first drives
- Recheck alignment after suspension changes
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1609 |
| UPC | 614901453454 |
| Position | Rear, lower |
| Application | 2- and 4-door models with 4-link long arm lift kits |
Vehicle fitment
It applies to 2- and 4-door models with 4-link long arm lift kits. Confirm your suspension setup and your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents against your installation before starting.












