Rubicon Express
Showing 625–672 of 898 resultsSorted by popularity
-
Track Bar
Rubicon Express Track Bar Adjustable Extreme-Duty Front XJ/ZJ 4.5 Inch -7.5 – RE1660
- Adjustable Extreme-Duty front track bar for the Jeep XJ and ZJ
- Designed for lifts between 4 and 6 inches
- Super-flex joint on one end for articulation
- Requires the RE1665 bracket and re-drilling of the XJ lower mount
- Part number RE1660
SKU: R/ERE1660 -
-
Lift Kits
Rubicon Express JK 1.5″ Leveling Kit – JK1301
- Fits 2007 to 2018 Jeep Wrangler JK, 2- and 4-door models
- 1.5-inch front lift that levels the factory rake
- Front and rear polyurethane coil spring spacers
- New sway bar end links included
- Rated for tires up to 33 inches (33×12.50 maximum)
- Shock absorbers not included
SKU: R/EJK1301 -
-
Lift Kits
Rubicon Express 3.5 Inch Standard Coil Lift Kit with Mono Tube Shocks – RE7002M
- 3.5-inch standard coil lift for TJ or LJ Wranglers
- New coil springs, bump stops and extended sway bar end links
- Mono tube shocks included, per the title
- Rear track bar bracket; stock control arms and track bar retained
- Upgradeable to a 3.5- or 4.5-inch Super-Flex system
SKU: R/ERE7002M -
-
Dana 44 Miscellaneous Parts, Track Bar
Rubicon Express Adjustable Rear Track Bar – RE1690
- Rubicon Express RE1690 adjustable rear track bar
- Written for 2007–2018 Jeep Wrangler JK, 2-door and 4-door, with 3.5 inch or more lift
- Double bend for clearance; 1-3/8 x 3/16 inch 4130 chromoly
- Designed to clear Dana 44, Dana 60 and Ford 9 inch axle housings
SKU: R/ERE1690 -
-
Control Arms
Rubicon Express Heavy Duty Control Arm Brackets – RE9995
- Heavy duty front lower control arm brackets for TJ, XJ and ZJ Jeeps
- Weld-on only, mounts on the axle side, shipped raw steel
- Pre-packed alignment washers allow caster change
- Direct replacement for stock front lower brackets; sold as a pair
SKU: R/ERE9995 -
Transfer Case Yoke
Rubicon Express Rear Transfer Case Flange Adapter – RE1805
- Rubicon Express RE1805 rear transfer case flange adapter for 2 and 4-door models
- Billet aluminum flange
- 8mm-1.25 by 25mm socket cap screws included
- Use with drive shaft RE1887-240 (2-door) or RE1887-430 (4-door)
SKU: R/ERE1805 -
Lift Kits
Rubicon Express 2 Inch Economy Lift Kit with Twin Tube Shocks – RE7030
- 2-inch economy lift with 1.75-inch coil spring spacers
- Precision-valved twin tube shocks included
- Rear bump stops included
- Maximum tire size of 31 x 10.50
- No model years listed; confirm fitment before ordering
SKU: R/ERE7030 -
Lift Kits
Rubicon Express 3.5 Inch Standard Coil Lift Kit – No Shocks – RE7002
- 3.5 inch standard coil lift kit for Jeep Wrangler TJ or LJ
- Front and rear coil springs, bump stops and extended sway bar end links
- Rear track bar bracket; stock control arms and track bar retained
- Shocks not included; part number RE7002
SKU: R/ERE7002 -
-
-
-
Leaf Spring
Rubicon Express Leaf Spring Extreme-Duty Front CJ 4.5 Inch – RE1450
- Front single leaf spring for a 4.5 inch lift
- Extreme-duty build with diamond cut leaves and military wrap spring eyes
- Requires RE2785 conversion shackles and RE2050 spring plates
- Bushings not included; no vehicle or model years are given
SKU: R/ERE1450 -
-
-
-
Frame Crossmember
Rubicon Express Crossmember Extreme-Duty TJ 03-06/ 1 Of 2 – RE4200
- Long arm conversion pan for TJ Wrangler 03-06
- Rubicon Express RE4200, black powder coat, no welding required
- Drop-out center section for transmission and transfer case service
- Adds nearly an inch of ground clearance
SKU: R/ERE4200 -
-
Lift Kits
Rubicon Express 2 Inch Economy Lift Kit with Twin Tube Shocks – RE8530
- 2-inch economy lift with coil spring spacers and bump stop extensions
- Precision-valved twin tube shocks included
- Simple installation with spacers and shocks at each corner
- Maximum tire size of 31 x 10.50
- No model years listed; confirm fitment before ordering
SKU: R/ERE8530 -
Shock Absorbers
Rubicon Express RXT Monotube Shock Absorber – RXT2410B
- Rubicon Express RXT Monotube shock absorber, part number RXT2410B
- 24.5 inches extended, 14.5 inches collapsed, 10-inch stroke
- Eyelet mounts at both ends, gas charged
- Black urethane shock boot and all necessary mounting hardware included
SKU: R/ERXT2410B -
-
-
Lift Kits
Rubicon Express 4.5 Inch Super-Flex Short Arm Lift Kit with Twin Tube Shocks – RE8000T
- 4.5-inch Super-Flex short arm lift for Grand Cherokee ZJ
- Adjustable rear control arms and front track bar with Super-Flex spherical ball joints
- Twin tube shocks included
- Gen II sway bar disconnects and stainless steel brake lines
- Keeps the factory short arm design and mounting points
SKU: R/ERE8000T -
Leaf Spring Bushings & Pads
Rubicon Express Leaf Spring Bushing Kit 1.5 Inch Id Main Eye/ 1.5 Inch Id Shackle/ 4 Springs (Black) – RE1492
Leaf Spring Bushings & PadsRubicon Express Leaf Spring Bushing Kit 1.5 Inch Id Main Eye/ 1.5 Inch Id Shackle/ 4 Springs (Black) – RE1492
- Black polyurethane leaf spring bushing kit with sleeves
- Covers four leaf springs
- For springs with 1.5-inch inside diameter main eye and shackle bushings
- Non-greaseable service; part number RE1492
SKU: R/ERE1492 -
-
-
-
-
Flex Joints
Rubicon Express Super-Flex Assembly – RE3791
- Weld-on Super-Flex joint cartridge for upper control arm mounts
- Fits the XJ, MJ, ZJ, TJ and WJ Jeep chassis
- UHMW side races and a threaded adjuster nut for tightening and rebuilding
- Serviceable, with a rebuildable joint
- Part number RE3791, UPC 614901440928
SKU: R/ERE3791 -
Lift Kits
Rubicon Express 3.5 Inch Super-Flex Short Arm Lift Kit – No Shocks – RE7143
- 3.5-inch lift from a Super-Flex short arm system that keeps the factory mounting locations
- Adjustable upper control arms and fixed lower control arms with serviceable Super-Flex ball joints
- New PT-Meg Super-Ride bushings for on- and off-road use
- Replacement lift springs, extended bump stops and longer stainless steel brake lines
- Shocks not included; confirm fit before ordering
SKU: R/ERE7143 -
Bump Stops
Rubicon Express Bump Stop Upper Front/Rear TJ 2.0 Inch Plus /Pair – RE1395
- Rubicon Express RE1395 extended bump stops for the Jeep TJ, sold as a pair
- Extension figures are 2.0 inches and 1.5 inches, so confirm before ordering
- Position may be front and rear, so confirm before ordering
- Self-tapping mounting bolts included
SKU: R/ERE1395 -
-
Sway Bar Link - Disconnect
Rubicon Express Extreme-Duty Sway Bar Disconnects – RE1130
- Extreme-duty front sway bar disconnect with adjustable length
- Spherical bushings and zinc plated snap pin for quick disconnect
- Pre-installed grease fittings and silver powder coat finish
- Made in the USA.
SKU: R/ERE1130 -
Shock Mounts
Rubicon Express Shock Mounts Weld-On Drop Position TJ – RE2035
- Rubicon Express RE2035 weld-on drop position shock mount for the TJ rear
- Stronger than factory mounts and repositionable
- Clears the coil spring cup after the pinion is rotated upward
- Bare steel, sold as a pair; welding required
SKU: R/ERE2035 -
Bump Stops
Rubicon Express Bump Stop Lower Front/ Rear TJ/LJ/XJ/ZJ 3.0 Inch /Pair – RE1383
- Rubicon Express lower bump stops, 3.0-inch, sold as a pair, part number RE1383
- Extended stops for coil spring applications
- Fits inside the front coil
- Self-tapping mounting bolts included
- Vehicles based on the title: TJ, LJ, XJ and ZJ
SKU: R/ERE1383 -
-
Axle Truss
Rubicon Express Extreme Duty Axle Truss 3-Link Upgrade Components – RE4541
- 3-link rear suspension upgrade for the Jeep Wrangler JK
- Heavy duty CNC laser cut axle truss and differential support ring
- Adjustable chromoly center link
- Designed as a bolt-on for Dana 44 housings
- Made in the USA with a Rubicon Express Advantage lifetime warranty
SKU: R/ERE4541 -
Control Arms
Rubicon Express Super-Ride Front Lower Fixed Control Arms – RE3721
- Front lower fixed control arms for the Jeep Wrangler JL, 2-door and 4-door
- 1.75-inch diameter, thin wall 4130 chromoly
- PT MEG bushings, longer than the OE arm for caster when lifted
- OE brake line bracket mount built into the arm
SKU: R/ERE3721
