Overview
The Rubicon Express RE3766-1 is a small Super-Flex coupler rod end with a 1-inch threaded coupler and a 1/2-inch inside diameter ball. It is the type used in Rubicon track bars and upper control arms.
It arrives welded, powder coated Rubicon grey and fully assembled, so it is ready to install without a separate build step. It is a finished DOM joint that can be serviced, and a joint rebuild kit is available for it.
Key features
- Small Super-Flex housing
- 1-inch threaded coupler
- 1/2-inch ID ball
- Welded and powder coated Rubicon grey finish
- Fully assembled and ready for use
Setting up the joint
A coupler rod end sits at the end of a track bar or upper control arm and lets the arm move through its travel while staying connected to the axle or frame bracket. Because the joint pivots under load on every bump, the ball and housing take a steady amount of wear. Thread engagement matters: the coupler should be turned onto the tube until the joint is centered, then the jam nut tightened against it so the adjustment does not move under driving.
When choosing a joint like this one, start with the size of the coupler thread and the ball diameter on the arm you already have. Upgrading the arm or bar at the same time often makes sense, since bent tubes and worn bushings affect how the joint wears. Check the boot or seal, if fitted, for cracks, and look for play by pushing the arm side to side with the wheels on the ground.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE3766-1 |
| UPC | 614901440720 |
| Housing | Small Super-Flex |
| Coupler | 1-inch threaded |
| Ball | 1/2-inch ID |
| Finish | Powder coated Rubicon grey |
| Joint type | DOM, finished joint |
| Maintenance | Serviceable, joint rebuild kit |
Vehicle fitment
It is a universal fit part and is not built for one vehicle. Match the thread and the joint size to the track bar or control arm you are building.
Confirm the thread and ball size on your existing parts before ordering.

