Overview
The Rubicon Express RE1393 is a 2-inch rear bump stop spacer, sold in pairs. It relocates the bump stops after the suspension has been lifted, to compensate for the lift.
The spacers are a direct fit and use nylon bump stops with self-tapping mounting bolts. Match the spacer to your rear suspension and lift before buying.
Key features
- 2-inch rear spacer
- Nylon bump stop
- Self-tapping mounting bolts included
- Sold in pairs
Bump stop travel and lifts
A bump stop limits how far the axle can travel toward the frame. When a lift raises the body, the stop sits farther from its contact point, so relocating it keeps the limit where the suspension expects it. Spacers change the point at which the stop engages, which affects ride and how the suspension handles compression. Pairs are used so both sides of the axle limit travel evenly.
Check the lift height and the stop’s position before installing spacers. Look at the stop for cracks or flattening after hard use, and check that the mounting bolts remain tight. Because a worn stop can wear through the spring or frame bracket, inspect it at each service interval.
- Measure the lift height before ordering
- Check stop contact at full compression
- Inspect nylon stops for cracks
- Recheck mounting bolts after early use
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1393 |
| UPC | 614901438109 |
| Spacer height | 2 inches |
| Position | Rear |
| Material | Nylon |
| Mounting bolts | Self-tapping, included |
| Sold as | Pair |
| Fitment | Direct fit |
Vehicle fitment
Check the bump stop location and the lift height on your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The mounting bolts are self-tapping and included, so no separate hardware is needed for the spacer.


