Overview
The Poison Spyder BFH II Rear Bumper with 2 Inch Receiver is a low profile faceted rear bumper for the JK Wrangler made of CNC laser cut 3/16″ plate steel. It has mounts for dual recessed 6″ LED light bars and a slot for a hitch receiver, which requires part number 17-17-030.
Poison Spyder says BFH stands for “Built For the Hammers”. The bumper is no wider than the Jeep JK Wrangler’s rear body tub, and the angled facets let it slide over rocks while protecting the tub corner. It has no provisions for a spare tire carrier, though it may be compatible with the OE tailgate-mounted carrier depending on the size of the spare. High clearance recovery shackle tabs cut from 1″ thick plate steel take 3/4″ recovery shackles.
Installation requires cutting the Jeep’s frame rails and stock rear crossmember, and the bumper is bare steel.
Key features
- CNC laser cut 3/16″ plate steel
- Mounts for dual recessed 6″ LED light bars
- Slot for hitch receiver (requires 17-17-030)
- High clearance shackle tabs from 1″ thick plate steel
- No spare tire carrier provisions
- Fits 2-door and 4-door models
Choosing lights and a hitch
A rear bumper like the BFH II takes on lights, a hitch and recovery gear, so plan the setup before the bumper is mounted. The dual recessed light bar mounts work best with wiring routed inside the bumper and secured away from the tire and approach path. Confirm that the light bars you pick match the mount size and that the wiring is protected from water and debris.
A hitch slot requires a separate receiver crossmember, so choose the hitch class and tow load before buying. Heavy loads on a rear bumper stress the mounting points, so check weld and bolt condition after towing. Recovery shackles and straps also load the tabs, so use rated gear and inspect the tabs after heavy use.
- Route light wiring inside the bumper
- Check the hitch receiver rating before towing
- Inspect welds and tabs after recovery
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part type | Rear bumper |
| UPC | 614901751055 |
| Material | 3/16″ plate steel |
| Finish | Bare steel |
| Shackle tabs | High clearance, 1″ thick plate steel, for 3/4″ shackles |
| Lights | Mounts for dual recessed 6″ LED light bars; lights not included |
| Hitch receiver | Slot only; requires part number 17-17-030 |
| Spare tire carrier | No provisions |
| Installation | Requires cutting frame rails and rear crossmember |
Vehicle fitment
It is designed for the 2007-2018 Jeep Wrangler JK in 2-door and 4-door bodies. Confirm fit for your vehicle’s year, model and trim before ordering.
Other Wrangler generations are not covered, and the hitch receiver part 17-17-030 is a separate item. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires cutting the Jeep’s stock rear frame rails and crossmember, and Poison Spyder supplies a laser-cut steel template for the cuts. Read the installation instructions first.
Paint or powder coat the bare steel before final installation.
What’s included
- Rear bumper with recovery shackle tabs
- Laser-cut steel template
Not included: the hitch receiver (17-17-030), LED light bars and recovery shackles.









