Select your vehicle
-13%

Poison Spyder 3/4 Inch LED Marker/Turn Signal Lamp (Red) – 41-04-070

Poison Spyder Customs

$36.24In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 6:10 PM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Red 3/4-inch LED marker and turn signal lamp from Poison Spyder Customs, part number 41-04-070
  • Three-wire design runs as a turn signal and marker light together, or as either one alone
  • DOT-approved LED lamp, supplied with a pigtail harness and mounting grommet
  • Universal fit; sold individually, with a quantity of two for a pair

Description

Overview

The Poison Spyder Customs 3/4 Inch LED Marker/Turn Signal Lamp in red, part number 41-04-070, is a three-wire LED lamp that can work as a turn signal and a marker light at the same time. It is a universal fit lamp rather than one built for a specific vehicle.

Wiring sets the function. Use all three wires for combined turn signal and marker operation, or use two wires and leave the third unused to run the lamp as only a marker light or only a turn signal. The LED lamp is DOT-approved; confirm local road-use rules for your use.

Key features

  • Three-wire design: turn signal and marker light together, or either function alone with two wires
  • LED lamp that Poison Spyder describes as DOT-approved
  • Red lens; the same lamp is also offered in clear/amber
  • Pigtail harness and mounting grommet included
  • Sold individually; select a quantity of two for a pair

Choosing lamp placement

Placement decides how well a side marker or turn lamp can be seen. Mount the lamp where other drivers can see it from the front and side, and keep it clear of mud, road spray and the bumper edge. A red lens should be used only where local rules allow red lamps for the chosen function, so check before choosing the spot.

The 3/4 inch hole needs a clean, flat panel. Deburr the edges so the grommet fits snugly, and check behind the panel for wiring and body structure. A dab of sealant around the grommet keeps water from wicking into the lamp body.

Route the pigtail with slack and secure it with clips, away from heat and moving parts. Verify the ground and test each function before closing the panel.

  • Keep the lamp clear of mud and road spray
  • Deburr the hole so the grommet fits snugly
  • Test each wiring function before reassembly

Specifications

Brand Poison Spyder Customs
Part number 41-04-070
UPC 614901750492
Lamp size 3/4 inch
Lamp type LED marker and turn signal
Lens color Red
Wires 3
Quantity Each (two for a pair)

Vehicle fitment

This is a universal fit lamp, so it is not built for a particular make, model or year. Confirm that the mounting location suits a 3/4-inch lamp before installing it.

Installation notes

Wire the lamp through a fused circuit. Confirm local road-use rules for lamp color and function before connecting it to a turn signal circuit.

What’s included

The lamp comes with a pigtail harness and a mounting grommet.

SKU: PSC41-04-070 Category:

Specification

Shipping weight 1.00 lbs
Package dimensions 4.00 × 3.00 × 2.00 in
brands

Questions & Answers

Can this lamp work as a turn signal and a marker light at the same time?

Yes. The three-wire design can run both functions at once. Use two wires and leave the third unused to run the lamp as only a marker light or only a turn signal.

Is the 41-04-070 sold as a pair?

No. It is sold individually. Select a quantity of two if you need a pair, which is common for matching side marker lamps on both sides of a vehicle.

Is this lamp DOT-approved?

Poison Spyder describes these high quality LED lamps as DOT-approved for use on your vehicle. Confirm local road-use rules for your use.

What comes with the lamp?

A pigtail harness and a mounting grommet are included. The lamp is also offered in clear/amber if a different lens color is needed.

How do I keep water out of a 3/4 inch LED lamp?

Seal the mounting grommet fully and route the pigtail so water runs away from the connector. Use dielectric grease on the plug contacts, and check the seal after washing or trail crossings.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon