Overview
The Poison Spyder JK Body Armor, bare steel, part number 17-08-410, is a 3/16 inch steel armor panel for the 2-door Jeep JK. It covers the thin factory sheet metal of the body, and it follows the body contours so the armor does not reduce ground clearance when used by itself. It fits the 2-door Wrangler JK from 2007 to 2018.
Poison Spyder recommends this armor for any JK that will see off-road use where body damage is likely. The armor ships bare, so the finish is chosen by the installer, and the countersunk holes let the stainless screws sit flush with the surface. Used alone, the armor does not reduce ground clearance. Used with the factory Rubicon rocker rails, it helps stop rocks from pushing those rails up into the body, and used with JK Rocker Knockers it becomes one more layer of rocker protection.
Key features
- 3/16 inch steel, CNC laser-cut and precision brake-formed
- Shaped to the unique contours of the JK body
- No loss of ground clearance when used alone
- Spyder logo CNC cut into the armor
- Countersunk bolt holes with stainless steel flat-head cap screws
- Can be painted, powder coated, polished or clear-coated
Body armor and trail damage
Rocker and body armor works by taking the first hit. On a trail, rocks, stumps and ledges strike the lower body first, and thin sheet metal dents or tears under that load. A steel plate spreads the impact across a wider area, which keeps the damage at the plate rather than the door frame and floor pan behind it.
Bare steel is a practical choice when you plan to finish the armor yourself. It takes primer and paint well, and it can be powder coated for a harder surface. Before finishing, clean the surface and remove any mill scale or oil, since coatings bond poorly to contaminated steel. Once coated, check the edges and fastener holes for chips after each trail season.
- Clean and degrease the steel before coating
- Prime bare spots soon after cutting
- Check fastener holes for rust each season
- Recheck fastener torque after the first trail runs
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 17-08-410 |
| UPC | 614901726824 |
| Type | Formed plate guard |
| Finish | Bare steel |
| Material | 3/16 inch steel plate |
| Body style | 2-door |
| Fasteners | Stainless steel flat-head cap screws |
| Bolt holes | Countersunk |
| Installation | Cutting or drilling required, body drilling |
Vehicle fitment
The armor is made for the 2-door Jeep JK, which is the Wrangler (JK) from 2007 to 2018. Confirm your Jeep is a 2-door JK before ordering, and check the body fit for your vehicle before drilling.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Drilling the body is required, and the countersunk holes take the supplied flat-head screws for a clean surface. Paint or powder coat the armor before fitting it if you want it to match the Jeep, since it ships bare.
What’s included
One bare steel JK Body Armor panel with countersunk bolt holes and stainless steel flat-head cap screws.









