Overview
The Poison Spyder BFH front bumper with shackle tabs and Trail Stinger, part number 11-16-020-DS, is a bare steel front bumper built for hard-core rock crawling. Poison Spyder Customs says BFH stands for Built For the Hammers, with the aim of delivering as much ground clearance, tire clearance and approach angle as possible.
The bumper is CNC laser-cut from a single piece of high strength 3/16-inch plate steel and precision brake-formed. It is no wider than the frame rails, with angled facets that help it slide over rocks, and it has an integrated winch mount in a one-piece design.
The Trail Stinger extends 13.4 inches forward from the front edge of the bumper and stands 17 inches high above its top surface, giving simple lines and some forward-flop protection. The recovery shackle tabs are machined from 1-inch thick plate steel for 3/4-inch recovery shackles and match the angles of the bumper, so approach angle is not lost.
Key features
- Cut from a single piece of 3/16-inch high strength plate steel
- No wider than the frame rails
- Angled facets to slide over rocks
- Integrated winch mount, one-piece design
- Trail Stinger extends 13.4 inches forward and rises 17 inches
- Shackle tabs from 1-inch thick plate steel
- Tabs sized for 3/4-inch recovery shackles
- Bare steel finish
Winch and recovery setup
A front bumper with an integrated winch mount is only part of a recovery setup. Before mounting a winch, confirm the winch’s rated pull, its cable length and the fairlead position. The winch should sit centered on the bumper so the line pulls straight, and the mounting bolts need to be tightened to the correct torque before the first recovery.
Recovery shackles are the link between the vehicle and the strap or line. Use shackles that match the tab size, and keep the pin fully seated and secured. Inspect the shackle tabs for cracks and bent edges after any heavy pull, since the tabs take the full load of the recovery.
Bare steel bumpers rust quickly where the paint is removed, so the welds and edges need protection after any cutting or drilling. Plan a coating before the bumper goes into service, and check the finish along the trail-facing edges each season.
- Center the winch on the bumper
- Match shackle size to the tabs
- Inspect tabs after heavy pulls
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 11-16-020-DS |
| UPC | 614901723571 |
| Product | Front bumper with shackle tabs and Trail Stinger |
| Material | Steel plate, 3/16 in; shackle tabs 1 in thick |
| Finish | Bare steel |
| Width | No wider than the frame rails |
| Stinger projection | 13.4 in forward of the bumper edge |
| Stinger height | 17 in above the bumper top surface |
| Shackle size | 3/4 in recovery shackles |
| Winch mount | Integrated |
| Light mounts | Not included |
| D-ring mount | Included |
Vehicle fitment
The bumper is no wider than the frame rails. Confirm your vehicle’s year, model and trim before ordering.
The Jeep mention does not identify a model, so do not assume it fits every Jeep. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bare steel needs paint or powder coat before it sees weather. Auxiliary lights that were bumper mounted will not be carried by this bumper, since it includes no light mounts.
What’s included
- Front bumper with integrated winch mount
- Trail Stinger
- Recovery shackle tabs
Not included: a winch, shackles, lights or paint.
















