Overview
The Poison Spyder 14-02-050 is a bare steel DeFender front fender with a negative flare. DeFenders are made from heavy duty P&O steel plate that Poison Spyder cuts with CNC lasers and forms with precision brakes, and the negative flare is the shape the company builds for the most clearance for tire articulation on tight trails.
The outer edge has an underside return, a lip along the bottom of the fender. The return keeps the fender from cutting into a fully stuffed tire and adds strength to the outer edge, where rocks, canyon walls and trees are most likely to hit the Jeep.
The negative flare narrows the fender compared with the stock width. Its edge tapers in to hug the hood, leaving room to mount the hood latch and a heavy steel rub rail that guards the hood side. The flare suits owners who want to keep a low center of gravity with large tires and only minimal lift, and it allows full suspension articulation with an armored front fender. It is not a highline style fender.
Poison Spyder designed the DeFender to work with the factory inner fenders, which saves the cost of replacing them and avoids moving the under-hood gear. Even without a highline, the DeFender opens the wheel area far more than stock or competing tube fenders. The rear of the wheel opening, where larger tires rub at full steering lock, sits about 2.5 inches further back than typical tube fenders and about 4 inches further back than the stock Jeep flares.
Key features
- Negative flare that hugs the hood edge
- Heavy duty 3/16-inch P&O steel plate, CNC laser cut and brake-formed
- Underside return for edge strength and fully stuffed tire protection
- Steel rub rail that protects the side of the hood
- Works with the Jeep’s factory inner fenders
- Mounting location for a ¾-inch LED marker
Hood latch and rub rail fit
A negative flare puts the fender edge close to the hood, so the hood latch and rub rail are the first things to check. Test-fit the hood with the fender loosely mounted and watch for contact at the latch and along the rub rail before drilling the final holes.
Heavy steel fenders add weight at the front corners, so the suspension and steering geometry matter more with large tires. Recheck the tire clearance at full lock and at full suspension compression, since the rear of the wheel opening is set well back.
Keep the bare steel sealed and painted after fitting. Inspect the underside return and the welds after hard trail use, and touch up any scrapes before rust develops. Check the mounts for loosening after the first few runs.
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 14-02-050 |
| UPC | 614901724783 |
| Location | Front |
| Type | Tube fender |
| Flare | Negative flare |
| Material | 3/16-inch heavy duty P&O steel plate |
| Wheel opening | About 2.5 inches further back than typical tube fenders |
| Marker mount | ¾-inch LED marker |
| Finish | Bare steel |
| Installation type | Cutting or drilling required |
| Fitment type | Direct fit |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering, since the hood edge and fender shape are specific to the vehicle.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The fender requires cutting or drilling. It is built to use the Jeep’s factory inner fenders, so those stay in place. Test-fit the hood latch and rub rail before final mounting.
What’s included
One bare steel DeFender front fender with the negative flare and its underside return.
Not included: the LED marker light for the ¾-inch mounting location, and any paint or powder coating.
















