Overview
The Poison Spyder Stock Crusher Corners in bare aluminum, part number 15-04-010-ALUM, are full tube fender style rear corner guards made of 3/16 inch 6061-T6 aluminum for a Jeep, with stainless steel hardware.
Stock Crusher Corners include the factory wheel and fuel filler opening, plus mounting holes for factory equipment, including factory flares, tail light and license plate frame. The aluminum version saves up to 50 pounds compared with the steel Crusher Corners and is designed for protection from side and corner impacts.
Key features
- 3/16 inch thick 6061-T6 aluminum
- Stainless steel hardware
- Full corner type
- CNC laser-cut and formed for a precise fit
- Includes the factory wheel and fuel filler opening
- Mounting holes for factory flares, tail light, license plate frame and other factory equipment
- Can be painted, powder coated, polished or left as raw aluminum
- Saves up to 50 pounds compared with steel
Protection and finish choices
Rear corner guards take the impacts that come from trail obstacles, tight trees and rocks that catch the corners of the body. Because the guards mount near the wheel opening and tail area, they protect the body panel and the lights from direct strikes. A full corner design covers more of the rear edge, which helps where the body is most exposed when turning or backing up on the trail.
Bare aluminum shows scuffs and oxidation over time, so the finish decision should be made before cutting. Paint or powder coat gives a uniform look and extra protection, while polished or raw aluminum needs periodic cleaning. Seal any drilled holes and bare edges so moisture does not get under the guard. Plan the wiring for any tail light or license plate changes before the guard is fastened.
- Test-fit before marking drill holes
- Deburr and seal cut edges
- Clean and inspect fasteners after rough trails
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 15-04-010-ALUM |
| UPC | 614901726251 |
| Product type | Corner guards (Crusher Corners) |
| Corner type | Full |
| Material | 6061-T6 aluminum |
| Thickness | 3/16 inch |
| Finish | Bare aluminum |
| Hardware | Stainless steel |
| Installation type | Cutting or drilling required |
| Fitment type | Direct fit |
Vehicle fitment
Confirm fit for your Jeep’s year, model and trim before ordering, including whether the set is for the front or rear.
Installation requires cutting or drilling, so plan the work and the finish before starting. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Test-fit the part before any cutting, drilling or finishing, and follow the fastener instructions for your vehicle. Torque fasteners to the value your hardware requires and re-check them after the first miles of driving. If cutting or drilling is needed, use eye protection and treat bare edges to prevent corrosion. Check local regulations on vehicle modification.
What’s included
Bare aluminum Stock Crusher Corners with stainless steel hardware. Check the package contents against your installation before starting.
Not included: Paint, powder coating and finishing, which are optional.









