Overview
The Poison Spyder TJ lower A-pillar light mounts (part number 45-28-RDA2) give a way to mount a pair of off-road lights on the lower A-pillar area of the Jeep TJ. They are designed to fit the Rigid Industries Dually or Dually D2 LED lights. Their 7/16 inch mounting hole may also suit other brands of compact off-road lights.
The brackets are CNC laser cut and brake formed from steel, then powder coated semi-gloss black. They are sold in pairs and include rubber liners to protect the paint on the Jeep. They are universal fit, and the TJ is the vehicle they are designed around.
Key features
- Pair of brackets for two off-road lights
- Designed for the lower A-pillar area of the Jeep TJ
- Designed for Rigid Industries Dually or Dually D2 LED lights
- Light mounting hole is 7/16 inch
- CNC laser cut and brake formed steel
- Semi-gloss black powder coat
- Rubber liners included
Choosing and aiming off-road lights
Light position on an A-pillar bracket affects both coverage and glare. Lights mounted lower on the pillar sit closer to the windshield’s line of sight, so aim them with the vehicle parked on level ground and the lights set slightly down the trail. Check beam height at night before setting the final position.
Weight matters on a TJ because the pillar area sees vibration on rough trails. Keep the lights as light as the job allows, and use the supplied liners between the bracket and the body to prevent scuffing. Wiring should be routed with slack so the lights can move without tension on the connectors.
Before a trip, check that the bolts are snug and the lights are not rubbing the windshield frame or the hardtop. After the first few trail runs, look for loosened hardware and recheck the aim.
- Aim with the vehicle on level ground
- Route wiring with slack at the bracket
- Recheck bolts and aim after the first trail runs
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 45-28-RDA2 |
| UPC | 614901728729 |
| Type | Light mounting bracket set |
| Material | Steel |
| Finish | Black powder coated, semi-gloss |
| Light mounting hole | 7/16 inch |
| Quantity | Pair |
| Included | Rubber liners to protect paint |
Vehicle fitment
The brackets are made for the Jeep TJ, which covers the 1997 to 2006 Wrangler model years, and they mount on the lower A-pillar area. Confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The brackets mount to the lower A-pillar area, and the rubber liners go between the bracket and the paint to protect it. Mount the brackets as the design requires, and wire the lights through a fused relay.
What’s included
A pair of steel light mount brackets with rubber liners.
Not included: the off-road lights, which are sold separately.














