Overview
The Poison Spyder Ricochet Rockers in bare steel, part number 13-50-010, are rocker armor with a combined 5 inch step and slider. They can be used alone or together with Crusher Corners. Confirm fit for your vehicle’s year, model and trim before ordering.
The step plate is dimpled, and the dimples point upward to give foot traction when entering or leaving the vehicle, even when boots are covered in snow or mud. The step also reinforces the slider underneath it. The assembly comes ready to paint and bolt on. The slider is built from 1.5 inch DOM tubing with dual tube support, and the 3/16 inch steel gussets are brake-formed to stay part of the step assembly.
Key features
- 5 inch dimpled step plate
- Dual tube support and slider bar of 1.5 inch DOM tubing
- Step and corner gussets of CNC laser-cut 3/16 inch steel
- Brake-formed gussets for strength and a clean appearance
- Professionally welded assembly
- Countersunk 3/8 inch stainless hardware
Step and slider use
A step that also works as a slider sees two kinds of use: climbing in and out, and taking knocks from the side of the trail. The dimpled surface gives grip for the foot, while the slider absorbs contact from rocks and ledges. Keeping the step free of packed mud helps it work as intended in both roles.
Because the steps and gussets are welded and brake-formed, the assembly is designed to hold up as one unit. Look for weld cracks or flexing at the gussets after hard trail use. If you plan to paint bare steel, prepare the surface first, since rust starts quickly on exposed metal in wet conditions.
- Check welds after hard trail use
- Clear mud from the dimpled step
- Prep bare steel before coating
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 13-50-010 |
| UPC | 614901724615 |
| Type | Formed plate guard with tubular standoff |
| Finish | Bare steel, ready to paint |
| Step | 5 inch dimpled plate |
| Slider tube | 1.5 inch DOM, dual tube support |
| Gussets | 3/16 inch steel, CNC laser-cut and brake-formed |
| Fasteners | Countersunk 3/8 inch stainless |
| Installation | Cutting or drilling required |
Vehicle fitment
Check the mounting points on your Jeep against the rocker location before ordering, and confirm the year, model and trim match.
Confirm your vehicle’s year, model and trim before ordering. Rubber liners are sold separately.
Installation notes
Mounting requires cutting or drilling, with countersunk 3/8 inch stainless hardware holding the rockers in place. Detailed instructions come with the kit. If you want to protect the paint under the rocker and reduce vibration, a rubber liner is available separately.
What’s included
The welded Ricochet Rocker assembly with its dimpled step, slider and countersunk 3/8 inch hardware.









