Overview
The Poison Spyder DeFender Front Fenders, part number 13-02-070, are bare steel front tube fenders with a 3-inch flare. Poison Spyder Customs fabricates them entirely from CNC laser-cut, precision brake-formed 3/16 inch plate, and they ship unpainted and ready to install.
The DeFender has an extra return along the underside of the fender. The lip protects the edge from cutting into a fully stuffed tire and adds strength where the fender is most likely to meet rocks, canyon walls and trees.
The 3-inch flares give tire coverage close to stock plastic flares on a TJ Wrangler. The fenders work with the Jeep’s original inner fenders, so the under-hood gear stays in place and does not need to be relocated.
The back of the wheel opening sits about 2-1/2 inches further back than typical tube fenders, and about 4 inches further back than stock Jeep flares. This gives a larger wheel opening, including on the non-highline version.
Key features
- CNC laser-cut, brake-formed 3/16 inch steel plate
- Extra return along the underside for edge strength
- 3-inch flare with tire coverage close to stock plastic flares
- Retains the OE inner fender
- Mounting point for a 3/4-inch LED marker
- Wheel opening about 2-1/2 inches further back than typical tube fenders
Measuring before you cut
Tube fenders with a flare change how a Jeep looks and how it clears obstacles, so measuring first saves time. Set the tire at full lock and check the front edge of the fender against the tire sidewall, then check the rear edge against the inner fender and the steering components. Mark the cut lines with tape before any metal is removed.
Bare steel fenders need finishing once fitted. Remove the fenders, prime any cut edges, and paint them to match the body before reinstalling. Allow time for the paint to cure, and check that the fender still lines up with the door and hood gaps after the final fit.
- Confirm steering and tire clearance at full lock before cutting
- Prime all cut edges to slow rust
- Plan space for an LED marker if one will be mounted
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 13-02-070 |
| UPC | 614901723977 |
| Fender type | Tube fender with flare, front |
| Flare | 3 inches |
| Material | 3/16 inch steel plate |
| Finish | Bare steel, shipped unpainted |
| Installation type | Cutting or drilling required |
| LED marker mount | 3/4-inch LED marker |
| Fitment type | Direct fit |
Vehicle fitment
Built around TJ Wrangler tire coverage, these fenders are made for that body style. Confirm fit for your vehicle’s year, model and trim before ordering, and measure tire and steering clearance first.
Confirm your vehicle’s year, model and trim before ordering. The wheel opening and the cut for the flare depend on the vehicle, so measure your tire and steering clearance first.
Installation notes
Installation requires cutting or drilling. The fender retains the factory inner fender, so the under-hood gear stays where it is. Paint the fenders to match the body after fitting, since they ship unpainted.
What’s included
Bare steel front fenders with the 3-inch flare and the return along the underside.
Not included: Paint, since the fenders ship unpainted, and the LED marker, which the fender only provides a mounting location for.














