Overview
The Poison Spyder 45-28-R50-ALUM is a light-weight aluminum A-pillar mount for a 50-inch Rigid Industries E-Series or SR-Series LED light bar on the Jeep Wrangler JK. It holds the light bar over the windshield and is made for 2-door and 4-door JK models.
The mount is CNC laser cut from 3/16-inch thick plate, then brake-formed and finish welded. Its contoured, gusseted design holds the large 50-inch light bar securely on the highway and in rough terrain. It ships as bare aluminum and can be painted or powder coated in the color of your choice.
Installation uses the existing lower windshield bracket bolts, so the mount is fitted without a new mounting point. Rubber liners protect the Jeep’s paint under the mounts.
Key features
- Holds a 50-inch Rigid Industries E-Series or SR-Series light bar
- Light-weight aluminum construction
- CNC laser cut from 3/16-inch thick plate
- Contoured, gusseted design for strength
- Attaches with the existing lower windshield bracket bolts
- Rubber liners protect the paint
Wiring and light bar weight
A 50-inch light bar is a large load on the windshield area, and wind and rough roads will work on the mount and its bolts over time. Tightening and inspecting the fasteners after the first few drives helps keep the bar steady. Corrosion on bolts and bracket surfaces is worth watching, especially in areas where roads are salted.
Wiring is the other part of the job. Route the harness away from moving parts, hinges and sharp edges, and secure it with clips or ties. Reuse existing grommets where possible and seal connections so water does not reach them.
- Tighten and inspect mounting bolts after the first few drives
- Check the bracket surfaces for corrosion
- Route harnesses away from the windshield wipers and hinges
- Confirm the light bar sits level before final tightening
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 45-28-R50-ALUM |
| UPC | 614901728699 |
| Light bar size | 50-inch Rigid Industries E-Series or SR-Series |
| Material | Light-weight aluminum, 3/16-inch thick |
| Mounting type | Upper windshield, A-pillar |
| Finish | Bare aluminum |
| Fitment type | Direct fit |
Vehicle fitment
This aluminum mount is made for the Jeep Wrangler JK, in 2-door and 4-door models, and attaches over the windshield of the JK.
It is made for the Jeep Wrangler JK, not the TJ, LJ, YJ or JL. Check the year, model and trim against your vehicle before buying.
Installation notes
Installation uses the existing lower windshield bracket bolts. Rubber liners go between the mount and the paint. Confirm the bracket bolts are in good shape before you mount a large light bar.
What’s included
The bare aluminum A-pillar light bar mount with rubber liners.
Not included: the Rigid Industries 50-inch light bar, and any paint or powder coating.
















