Overview
The Poison Spyder 45-28-R54 is a bare steel A-pillar mount for a 50-inch Rigid Industries E-Series or SR-Series LED light bar on the Jeep Wrangler TJ. It mounts the light bar over the windshield.
The mount is CNC laser cut from 3/16-inch thick plate, precision brake-formed and finish welded. Its contoured, gusseted design provides the strength to hold a large 50-inch Rigid light bar securely on the highway or in rough terrain.
Installation is simple and uses the existing lower windshield bracket bolts. Rubber liners protect the Jeep’s paint under the mounts. The mounts ship as bare steel, ready for paint or powder coat in the color of the owner’s choice.
Key features
- Mounts a 50-inch Rigid Industries E-Series or SR-Series light bar
- 3/16-inch thick plate steel
- Contoured, gusseted design for strength
- Attaches with the existing lower windshield bracket bolts
- Rubber liners protect the paint
- Bare steel finish
Mounting a large light bar
A 50-inch light bar adds considerable weight and wind load to the windshield area. Before fitting one, look over the windshield frame, the bracket and the bolt holes for cracks, elongation or corrosion. A solid mounting point is more important than the mount itself when the vehicle is driven at highway speed.
Bare steel is ready for paint or powder coat, so the finish can match the rest of the vehicle. Mask the mating surfaces where the mount touches the bracket, because paint can change how the bolts seat and tighten. Use the rubber liners on every contact point to protect the paint on the Jeep.
Aim the light bar carefully and check the beam against the road before final tightening. Recheck the bolts after the first few drives, and inspect the liners for wear each time the light is removed.
- Inspect the windshield bracket before mounting
- Mask bolt surfaces before painting
- Recheck bolt torque after early drives
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 45-28-R54 |
| UPC | 614901728705 |
| Light bar size | 50-inch Rigid Industries E-Series or SR-Series |
| Material | 3/16-inch steel plate |
| Mounting type | Upper windshield, A-pillar |
| Finish | Bare steel |
| Fitment type | Direct fit |
Vehicle fitment
The mount is a direct fit for the Jeep TJ Wrangler, where it attaches to the A-pillar.
Confirm fit for your vehicle’s year, model and trim before ordering, particularly for JK, LJ or YJ models.
Installation notes
The mount fastens with the bolts already in the lower windshield bracket. Rubber liners go under the mounts to protect the paint. Check the bolt holes on your windshield bracket before fitting a large light bar.
What’s included
The bare steel A-pillar light bar mount with its rubber liners.
Not included: the Rigid Industries 50-inch light bar, and paint or powder coating for the bare steel.












