Overview
The Poison Spyder 13-02-080 is a solid aluminum inner fender kit made to install with Poison Spyder DeFender front fenders. Inner fenders sit under the front fenders, and this kit gives splash protection to the engine compartment along with a place to mount under-hood accessories.
Each inner fender is a three-piece bolt-together assembly cut from aluminum sheet by CNC laser. The kit also allows a complete bolt-in DeFender installation for owners who do not have their stock inner fenders or who would rather sell them than cut and reuse them.
No accessory mounting holes or brackets are supplied, so each installer decides where components mount. Most parts that were on the stock inner fenders can be remounted on the DeFender inner fenders by drilling a hole or making a simple bracket. For the air box, an aftermarket air intake or an open air filter element, such as a K&N conical filter, is the replacement to plan for.
Key features
- Solid aluminum panel design with no vent openings
- Three-piece bolt-together assembly for each side
- CNC laser cut aluminum sheet
- Splash protection for the engine compartment
- Bolt-in option for Jeeps without stock inner fenders
- Requires Poison Spyder DeFenders for installation
Solid versus vented engine bay
A solid inner fender blocks airflow through the wheel well and into the engine bay. Heat from the engine and the surrounding air stays in place more, so the layout of hoses, wires and accessories matters more. Some owners add a heat shield or route hoses away from the fender surfaces to manage that.
Accessory placement is the main planning task. Parts that once bolted to the stock inner fenders need new mounts, and solid panels leave fewer open areas for cable runs. Lay out the wire routes first, then drill and fasten the brackets. Keep the air filter path clear of the fender edge so the intake stays out of spray.
- Plan cable and hose routes before drilling
- Use grommets where wires pass through panels
- Check heat exposure around hoses and wiring
- Keep the intake path clear of splash
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 13-02-080 |
| UPC | 614901733150 |
| Material | CNC laser cut aluminum sheet |
| Construction | Three-piece bolt-together |
| Vent | Solid, no vent openings |
| Finish | Bare aluminum |
| Installation type | Cutting or drilling required |
| Fitment type | Direct fit for DeFender front fenders |
Vehicle fitment
Confirm the year, model and trim of your Jeep before purchase. The kit is designed to install with Poison Spyder DeFender front fenders, so confirm the fender model first.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Cutting or drilling is required for any accessory that moves to the new inner fenders. Plan the accessory layout before drilling, because no mounting brackets are supplied. The stock air box has no solution in this kit, so choose an intake or open air filter before installing.
What’s included
The solid aluminum inner fender kit, built as a three-piece bolt-together assembly for each side.
Not included: the DeFender front fenders the kit requires, any accessory mounts or brackets, and an air intake or air filter.









