Overview
The Poison Spyder Rocker Knockers, bare steel, part number 14-08-050, are body-mounted rocker guards for most Jeep CJ, YJ, TJ and LJ models, . They are built from high strength 3/16 inch plate steel and brake-formed to a glove fit against the rocker panels, with very little loss of ground clearance.
Rocker panels are the part of a Jeep that takes the most damage on a trail, from rocks underneath and from the sides as the vehicle works through tight spots. These guards clad that area in steel so the factory sheet metal is less exposed. They bolt to the body in key areas and interface with strengthened parts of the tub such as the body mounts and strengthening ribs.
The guard attaches to the body rather than the frame, so the mounting points are on the tub.
Key features
- High strength 3/16 inch plate steel, CNC laser-cut
- Brake-formed for a close fit to the rocker panel lines
- Countersunk bolt holes for the stainless steel flat-head hardware
- Flat, unobstructed surface for sliding over obstacles
- Bolts to the body and to strengthened tub areas
- Mounts to the body, so no gap appears with a body lift
Protecting the rocker area
Rocker panels trap moisture and debris, and body-mounted guards can hold that dirt against the metal. Clean the gap between the guard and the rocker panel regularly, especially after mud runs, and look for corrosion at seams or along the edges where paint may have been cut.
The body mounting points carry the impact load, so inspect the bolts and the surrounding tub sections after trail use. Watch for cracks in the body near the mounts and for fasteners that have loosened. Rubber rocker liners, which are sold separately, can help reduce contact between the guard and the panel, and they are worth considering if paint protection is a concern.
- Clean the guard seam after mud runs
- Check body mount bolts for tightness
- Watch for body cracks near mounts
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 14-08-050 |
| UPC | 614901725612 |
| Type | Formed plate guard |
| Finish | Bare steel |
| Material | High strength 3/16 inch plate steel |
| Fasteners | Countersunk stainless steel flat-head, included |
| Models named | Most Jeep CJ, YJ, TJ and LJ models |
| Installation | Cutting or drilling required |
Vehicle fitment
The guard is written for most Jeep CJ, YJ, TJ and LJ models. The Wrangler YJ (1987 to 1995), TJ (1997 to 2006) and LJ (2004 to 2006) are the models with year ranges for this guard. Confirm the year, model and body style of your Jeep before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires cutting or drilling, and the mounting hardware and detailed instructions are included. Plan the bolt pattern before starting, since the guard is attached at the body rather than to the frame. Rubber rocker liners are sold separately and are not included.
What’s included
The rocker knocker guards with countersunk stainless hardware and the mounting instructions.









