Overview
The small white Spyder logo decal (part number 51-46-032-W) measures 2-1/4 by 3-1/2 inches. It is die-cut from quality automotive exterior vinyl and is meant for small spots such as fenders, corners, doors and toolboxes. The decal is universal fit and is not tied to any particular vehicle.
A small size like this one suits spaces a larger decal would not fit, such as the corner of a toolbox or the edge of a door.
Key features
- Measures 2-1/4 by 3-1/2 inches
- White vinyl
- Die-cut from automotive exterior vinyl
- Universal fit
Placing a small decal
Surface preparation matters more than anything else with a vinyl decal this small. Wipe the spot with a clean cloth and a mild cleaner, then let it dry fully so no wax, oil or road film is trapped under the adhesive. Test-fit the decal with masking tape before peeling the backing, so you can settle the position on a corner or panel edge.
Apply the decal in mild weather where possible, since cold surfaces hold adhesive poorly. Press from the center outward with a soft cloth or squeegee to push out air bubbles. Small decals on curved areas such as fender edges are easiest to place if you work slowly and avoid stretching the vinyl.
- Clean and dry the surface fully
- Use masking tape to test the position
- Press out bubbles from the center
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 51-46-032-W |
| UPC | 614901731804 |
| Type | Logo decal |
| Color | White |
| Size | 2-1/4 by 3-1/2 inches |
| Material | Automotive exterior vinyl |
Vehicle fitment
This decal is universal fit and not vehicle-specific. Measure the spot where it will go, since its size is small and fixed.
What’s included
One white Spyder logo decal.








